Tracing paper (paper) – sizes, types and applications

Tracing paper
– This is translucent paper, most often painted white. Today, ordinary white translucent paper has been transformed and placed among designer paper collections. The transparency and density of tracing paper is achieved due to less crushed fiber than in ordinary paper and the addition of binders and resin. Thus, the tracing is usually denser than that of paper
the same thickness. There is no standard classification for tracing paper.

What kind of tracing paper (paper) is there

Most often, it differs in purpose and types of printing as follows:

  • for artistic works (tracing paper for drawing, drawing, painting; it is usually white and has a density of 40 to 480 g/sq. m.);
  • PPC paper, i.e. paper for electrophotographic devices (most often white and has a density of 90 to 480 gsm);
  • for traditional types of printing (mainly offset and screen, has a density from 40 to 480 g/sq.m.);
  • tracing paper for plotters (inkjet and pen). калька успешно применяется для рисования в черно-белых тонах

In the following we will focus mainly on tracing paper for electrographic and traditional printing.

Paper in rolls is intended mainly for technical work on plotters and laser copiers, as well as drawing with ink and pencil.

Tracing paper sizes

The most commonly used tracing paper widths are 297 mm, 420 mm, 594 mm, 610 mm, 841 mm, 914 mm (imported) and 420 mm, 625 mm, 878 mm (Domestic). Office formats
A4 and A3 are popular for printing on copiers and laser printers, and for offset and stencil printing, printing formats are preferable – 70 by 100 cm, etc. Modern tracing paper comes in the following types: калька бумага для применения в художественных целях

  • classic white;
  • all possible colors and shades;
  • matte, parchment imitation;
  • for gold and silver;
  • with various patterns;
  • with patterns that imitate water.

Traditional use of paper (tracing paper)
— in booklets and calendars it is used as the second sheet after the cover. Tracing paper is used for inserts with the text of an invitation or postcard. Sometimes they make an envelope from tracing paper to match or the same color as the envelope. Also popular are business cards
on tracing paper.

Tracing paper causes virtually no problems in printing.

Ways to work with tracing paper

 Offset printing

Tracing paper has proven itself in offset printing, but the surface of tracing paper does not absorb moisture, so foil ink is recommended. Tracing paper does not dry well, so to avoid dragging paint from one sheet to another, it is better to unload the receiving area in a timely manner. You need to hold the finished prints in small piles because the paint needs to set.

    Digital printing

Excellent recommendation for the use of cripples and in the form of a seal. When printing on DPM toners
(Xerox, Canon, Konica Minolta, etc.), You should check the system on one sheet. Sometimes the toner does not bake onto the tracing paper correctly and falls off. When printing, it is necessary to take into account the temperature of the fuser, since you can lose not only the paper, but also the printing device. As a rule, the main characteristics of the material (low resistance) are indicated in the specification. Exotic problems are also possible – some brands of tinted tracing paper change color after heating. закладки и вложенные листы из кальки хорошо подходят для свадебных приглашений или открыток

It is better to glue tracing paper with synthetic glue
, because water-dispersed adhesive may cause a wavy effect at the gluing site. Tracing paper is sensitive to changes in climatic conditions, which means that in order to avoid curling of the paper before and after printing, the material must be protected from drafts and changes in temperature and humidity.

General property of all types of tracing paper
— the ability to absorb moisture from the air and increased sensitivity to changes in conditions in the print shop, so the packaging should be opened only immediately before printing. During the printing process, stable humidity and temperature are maintained (+20 °C and 50% humidity).

Sometimes difficulties arise during post-processing: the material is very dense and difficult to cut. The recommended height of the tracing paper stack when processing with a saber or guillotine cutter should be no more than 5 cm.

Before you order stamp
on tracing paper, do not forget to consult with the technologist of the printing house where you plan to complete the order. When working with any designer paper, you need to study it, do a few test prints and follow the manufacturer’s recommendations.

Watch video about using tracing paper

as paper for transferring drawings onto wood.