How to refill an inkjet cartridge at home with your own hands photo

Printed cases or how to refill hp cartridges | other office equipment | blog | club dns

Preface

With my very first computer, I got my first printer in 2005, still the only one HP DeskJet 6543
. As expected, it came with cartridges: black No. 130
volume 21ml
and color No. 134
14ml
.

I went to 10th grade at that time and the complete cartridges lasted me for a whole year, but then the question arose of buying new ones and I learned about their significant cost, bought another set, it didn’t last that long, then another one. But then an opportunity arose from a friend’s sister, and I learned that you can refill cartridges yourself. I took a bottle and a syringe from her to try and refilled it, and I was surprised that everything printed, just like with a new one, and the price was low compared to buying a new cartridge.

Then I bought my first refill kits from InkTec

How to refill an inkjet cartridge at home with your own hands photo

Oddly enough, my first two sets are black with markings HPI-0005D
and color HPI-0006C
(which I still remember buying for 500 rubles) are not intended for refilling my printer, but there were no problems with either the black or color cartridges, I’ll tell you why later.

Now I want to show you the set with black ink and tell you about it.

How to refill an inkjet cartridge at home with your own hands photo

Package includes:

-2x20ml bottle of syringe with black ink (alas, I’ve been using them for a long time; you can see them on the package);

– 3ml syringe with 2 special needles;

– polyethylene gloves;

– stand for cartridge;

– sticker on the cartridge and instructions.

As we can see, I have already told you about a set compatible with my cartridge No. 130
with marking HPI-6065D
, but in the end it is no different from the first HPI-0005D both in terms of configuration and print quality
because the ink in these two sets is pigment, which is very important, and the color set includes a larger number of syringes for each color.

You can refill in two ways or with the supplied syringe, counting how many milliliters you poured, or put a needle on a large syringe with paint, it’s even more convenient, there are divisions on the syringe container indicating the volume of paint. And if the cartridge is filled with less than its volume by 1 ml, although I was lucky, my large black cartridge could be filled with the entire large syringe at once.

How to refill an inkjet cartridge at home with your own hands photo

Now I’ll show you a couple more photos with the included stand for convenient cartridge refilling

How to refill an inkjet cartridge at home with your own hands photo

There is a hole at the bottom for a syringe to remove excess ink.

How to refill an inkjet cartridge at home with your own hands photo

Everything is simple with black paint, unlike colored paint. Color Ink Set HPI-0005D
did a great job of printing images until it ran out. Then I bought 3 colored syringes marked HPI-0002C
, which I later regretted, namely these inks turned out to be not pigment-based, but water-based, which instantly ruined the cartridge (green, I was an experimenter at that time))

How to refill an inkjet cartridge at home with your own hands photo

Then it turned out I found a gold mine, namely, the larger the volume of ink you buy, the more profitable it is.

For example, a standard large syringe with 20 ml of ink, either black or color, cost 70 rubles, when you could get a 100 ml bottle of the same paint for 130 rubles. benefits are obvious.

Ink for 130 rub.

How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo

How to refill an inkjet cartridge at home with your own hands photo

Now I want to talk about the benefits of refilling the cartridge.

Let’s imagine you print a lot of documents at the institute, you have a printer for cartridge No. 130
, and the cartridge currently costs 1250 rubles. and according to my measurements, it can print a pack of paper with black and white text, that is, 500 sheets. We buy a 100ml bottle of refill for 130 rubles. and in my experience, just like the cartridge resource, it is enough for 5 refills, that is, another 2500 sheets can be printed. It turns out that in general you can print with one cartridge: 3000 sheets and this costs 1250 130 = 1380 rubles, I think you can see how profitable it is to refill cartridges.

From personal experience

As a primitive man, I never used a stand for a cartridge, I just took a white sheet of paper, put the cartridge on and by poking in the sticker on the cartridge I found a hole, pierced it with a needle and refilled it (by the way, I also used a poking method with clean syringes to find the holes and pierced it when I pulled out the needle, saw what color needed to be poured into this hole) and refilled the syringe; if I poured ink from the cartridge, I took 1 ml of ink back into the syringe, and at the bottom, where the nozzles were, I wiped the leaked ink with a regular cotton pad.

I also want to say that the quality of the Korean ink from InkTec is excellent, even when I didn’t print anything from the cartridge all summer, it didn’t leak or dry out, everything was without problems. Also, always rinse the syringes with water, draw it in and pour it out, and so on several times.

The importance of paper

Over the entire period of its existence, the printer has printed 11,000 sheets or 22 packs of 500 sheets of paper.

Paper I used:

Snow Maiden – 11 packs;

ZOOM – 2 packs;

Data Copy Flex – 2 packs;

HP Office – 4 packs;

Ballet Classic – 1 pack;

Sveto Copy – 1 pack;

Canon – 1 pack.

How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo

I will also provide a table of characteristics of the brands of papers that I used

How to refill an inkjet cartridge at home with your own hands photo

Now I’ll tell you in detail about each brand of paper.

The paper that I frankly liked, which I consider the best that I have ever had, is Data Copy Flex
(produced in Sweden), it is very smooth with a good and uniform texture, uniform, the only negative is the price, it is the most expensive. Next in my assessment of paper quality is ZOOM
(made in Finland), the paper is of very good quality, pleasant to the touch and affordable. Now I am completely confident that the Scandinavian countries make the highest quality paper for which they are famous (it’s a pity I didn’t use XEROX made in Finland).

The third place in my ranking is taken by paper Canon Copy
In terms of quality and price it is quite good.

But my experience with our paper is quite interesting.

The very first paper I had was Snegurochka
, the quality of which I noticed has changed over time, before it was not so smooth and better in terms of quality. About the same situation, but a little worse, was with paper Sveto Copy
in 2005, it was of average quality; I came across it with a texture that was rough and rough to the touch, as if it had been cut out with a milling cutter, but a friend got the same brand that was quite decent, even better than Snegurochka. Other types of paper Ballet Classic
, HP Office
, (as Sveto Copy) is made by the International Paper concern and in my purely personal opinion the paper is the same, but the packaging is different and so is the price.

I used to read articles about refilling and this is what I emphasized. If you have a laser printer, don’t skimp on paper, take only class “A”, otherwise the number of cartridge refills will decrease significantly, because paper of a lower class contains more particles and paper dust that affect the cartridge, that is, using high-quality paper will be possible by 1-2 times refill the laser cartridge more.

Now I will show the evolution of packaging of original cartridges and protection of authenticity.

How to refill an inkjet cartridge at home with your own hands photo

The packaging of the new color, like the black one, has shrunk, I threw it away before this, so I can’t show it.

How to refill an inkjet cartridge at home with your own hands photo

Original cartridges, as I learned a long time ago, are filled with Dupont ink and are produced judging by the boxes that I had:

Black:

MALAYSIA,

Costa Rico,

IRELAND.

All colors are made in SINGAPORE (Singapore).

How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo

Over time, the protective sticker has also changed

How to refill an inkjet cartridge at home with your own hands photo

How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo

There are no complaints about the quality of all original cartridges, no matter where they were produced there were no problems.

And lastly, I’ll show you a close-up of the syringe and needle for refilling cartridges:

How to refill an inkjet cartridge at home with your own hands photo
How to refill an inkjet cartridge at home with your own hands photo

Refilling the cartridge for inkjet and laser printers

In addition to the fact that you need to take the printer’s instructions, before refilling the cartridge yourself, you need to study the properties of its operation, and when performing the procedure you will need the following things:

  • Empty cartridge;
  • Ink in tubes or jars;
  • Paper towels;
  • Medical surgical gloves;
  • Alcohol for wiping surfaces;
  • Cotton pad or swabs;
  • A syringe with a thin needle.

Instead of cotton wool with alcohol, you can use wet wipes. In this case, you need to act carefully so that water does not penetrate into the ink holes.

It is important to note that more than one syringe may be needed if we are talking about filling several containers of paint.

For a laser printer, in addition to the specified set of available tools, you may also need a needle to make holes in the compartment.

Also – a small self-designed spatula to pour colored and black powders into the container with substances.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
What you need

Refilling epson cartridges

Epson replacement cartridges are simply a reservoir filled with ink. The head and mechanism that provides printing are located in the printer and cannot be replaced. More precisely, they are subject to it if they fail, but this will have to cost an amount reaching 75% of the cost of a new printer.

And what’s most interesting is that the Epson printing unit most often fails precisely because of the use of counterfeit cartridges or home refilling with bad ink, and the warranty in case of such breakdowns is not valid. So if you are the owner of an Epson printer, you better think ten times before you decide to refill! However, the process itself is very simple.

The most important thing is not to remove the cartridge from the printer for more than a minute: otherwise the print head will dry out and you will have to struggle with cleaning it. And this, believe me, will not lead to anything good. The way out of this situation is quite simple and… not very pleasant: you will have to purchase another cartridge – take out the empty one, immediately insert the full one.

The refueling procedure itself, as I already said, is extremely simple, and it is the same for color and black models. The only difference is that in color cartridges you need to refill from 3 to 5 different compartments (according to the number of colors). This is done as follows.

As soon as you remove the cartridge from the printer, immediately seal the exit hole with a previously prepared piece of tape. Further actions depend on the cartridge model. If the tank has holes (they should be sealed with film) on the lid, then you are in luck, otherwise you will have to drill them yourself.

HP laser printer refill

HP printers labeled “laserjet” use laser printing technology. You can charge them at home using the diagram below.

IMPORTANT! The instructions describe the technology for disassembling and assembling the cartridge, which consists of many structural elements (metal pins, springs, various plastic parts, and others). Maybe you have a different cartridge, then you are in luck, because disassembly and assembly will be even faster and easier.

The principle of refueling is the same. The only difference is that some steps have to be skipped, which makes the job much easier. In short, you need to separate the hopper part of the cartridge from the unused toner part. Then remove the rotating parts: green (or blue) camera roller, magnetic drum and charging roller (corotron). Then unscrew the blade and drain the waste toner. Clean all components with a clean, lint-free cloth. Pour powder paint into the desired compartment and assemble the entire structure in reverse order.

First, let’s provide a good video, below is the text algorithm.

  1. Turn off the power using the button located on the body. Unplug the cord from the outlet.
  2. Open the cover on the front or top of the chassis (depending on the printer).
  3. Take the cartridge by the handle and pull it towards you, remove it.
  4. Remove the bolts that secure the side cover. How to refill an inkjet cartridge at home with your own hands photo
  5. Remove the plastic. How to refill an inkjet cartridge at home with your own hands photo
  6. Remove the camera roll by holding it by the outer white gears. How to refill an inkjet cartridge at home with your own hands photo
  7. Press the charge roller away from the wall with a flat-head screwdriver and remove it. How to refill an inkjet cartridge at home with your own hands photo
  8. Divide the cartridge into two parts: waste compartment and fresh powder. To do this, press the metal pin from the inside with a screwdriver, and grab it from the outside with small pliers. The pins must be pulled out on both sides of the cartridge. How to refill an inkjet cartridge at home with your own hands photo

    How to refill an inkjet cartridge at home with your own hands photo
  9. Remove the side spring. How to refill an inkjet cartridge at home with your own hands photo

    Then, holding the cartridge with both hands, separate the parts from each other. How to refill an inkjet cartridge at home with your own hands photo
  10. Pour the used toner out of the trash and recycle it. First, remove the metering blade from the container by removing the spring and unscrewing the two bolts. How to refill an inkjet cartridge at home with your own hands photo
  11. Clean the blade with a clean cloth/rag. The brush is prohibited for use. How to refill an inkjet cartridge at home with your own hands photo
  12. Reassemble the hopper by screwing the blade into place. How to refill an inkjet cartridge at home with your own hands photo
  13. On the part of the cartridge that contains the unused powder, unscrew the plastic part and remove the cap. Shake the can of powder well before filling. Unscrew the cap of the toner container and screw on the appropriate attachment (included in the kit or sold separately). Add new toner. How to refill an inkjet cartridge at home with your own hands photo

    How to refill an inkjet cartridge at home with your own hands photo

    How to refill an inkjet cartridge at home with your own hands photo

    How to refill an inkjet cartridge at home with your own hands photo
  14. Close the opening tightly with the protective cap.
  15. Reassemble the cartridge in reverse order, insert it into the printer, turn on the device and try to print the sensor.

When inserting the camera roll, carefully check with your hands whether it rotates easily. If rotation is difficult, errors were probably made during assembly and something is preventing the drum from rotating normally.

IMPORTANT: If there is no slot with a plug, you will need to refill the toner in the slot behind the magnetic roller. To avoid pouring powder into unnecessary places, insert half an A4 sheet into the slot and fill it in, having previously positioned the corner structure.

See the video for details.

Charging with new toner

  • We proceed directly to charging the cartridge with new toner.
  • We will work with another part of the consumable.
  • On one of the sides, after removing the protective cover, find the path for pouring powder. How to refill an inkjet cartridge at home with your own hands photo
  • Feel free to pull the cork out with a smooth jerk towards you. How to refill an inkjet cartridge at home with your own hands photo
  • Take the previously prepared toner bottle and shake it several times. Be careful not to get dirty.
  • Use a special nozzle or watering can for falling asleep. How to refill an inkjet cartridge at home with your own hands photo
  • Slowly and carefully pour the required amount of powder into the tube, and then tightly close the hole with the stopper. How to refill an inkjet cartridge at home with your own hands photo
  • Now you can assemble the cartridge.
  • Connect both parts into one whole. Then you insert the rubber shaft, followed by the photodrum. Do not forget to return the springs to their place, tighten the bolts, and adjust the side plastic cover.
  • Pay special attention to the contact between the drum and the rubber roller.
  • When the cartridge is ready for installation, do the following procedure: move the shutter, grab the white gears of the photo shaft with both hands and try to turn it with your thumbs. It should spin tightly, but smoothly.
  • Insert the consumable into the printer and try to print.

How to refill a laser printer?

The laser printer has high printing speed. Has better print quality.

Its price is higher than inkjet, but it can fully pay for itself. Unlike an inkjet printer, a laser printer does not add paint, but powders.

You need to work with them carefully, as there is a risk of poisoning. All work must be done in a room with an open window.

You can refill a laser printer cartridge step by step using the following instructions:

Remove the cartridge and inspect.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Remove the paint tank

Pry the cap off the device with a needle and open the container.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Open the container

Pour the powder into the hole and close with a stopper. Remove any remaining powder from the surface and place the container back into the printing mechanism.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Fill the cartridge with powder and remove excess

If a laser printer does not have a plug, but has a hopper and toner, then the instructions for refilling it look different.

As a rule, it is better to entrust this task to a professional, since there is a high risk of damaging the print head of such a mechanism. There are certain nuances here.

Firstly, you need to make the correct puncture in the hopper where the printing mechanism and the container with powders are stored, and secondly, you should select a place for the hole that is distant from the chips with microcircuits.

https://www.youtube.com/watch?v=Qhoera8QXoI

First, you need to pull out the device, make a hole with a scalpel or drill, away from the microcircuits, and then insert a funnel into the hole for refilling.

To avoid the possibility of damaging the printing mechanism, you should in this case try to completely disassemble the cartridge and find the slot where the powder refill should flow.

Interestingly, the second option is also not safe, since the photocell can be exposed and damaged.

For this reason, it is not recommended to refill such a printer yourself.

This can lead to the printing deteriorating dramatically and the printing mechanism being completely damaged.

To avoid making mistakes, it is better to entrust the work to a professional, replace the cartridge with a new one by ordering it from a trusted company, or use a training video where experienced people show proven techniques on how to refill an inkjet and laser printer cartridge.

How to refill brother printer?

Today, the brother HP Neverstop Laser laser model without a cartridge is gradually spreading.

It is refilled through a special refill toner, which is inserted into the refill compartment on the right when the device shows a warning icon that the ink is running out.

All that is required from the user is to insert the device into the compartment and wait a few seconds.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Filling brother

How to refill a canon printer?

The most popular canon model is the PIXMA MG2540S. This is a jet device, the filling principle of which does not differ from the general instructions.

Before starting work, you need to open the cover with the heart of the system, and then turn off the device from the network and carry out all operations.

Upon completion of work, double check the work by making two prints of the document.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Canon filling

How to refill an hp printer?

HP printer comes in inkjet and laser. The method of refueling them does not differ from that presented above.

Experts recommend looking at the instructions before adding paints.

It differs from other devices in that it requires 2.5 milliliters of paint or powder to achieve the desired effect.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Fill hp

How to refill a Lexmark printer?

The Lexmark printer comes in two types. There are laser and inkjet.

Its difference from other models is that refilling is possible no more than 5 times. In the future, you need to change the cartridge.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Lexmark Refill

How to refill a Samsung printer?

Samsung is the most common brand in all offices in the country due to its reliability and ease of use.

Refilling is carried out using the same method as other devices. It can be done no more than 10 times. Then you need to reflash the cartridge chip

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Samsung Refill

How to refill an LED and dot matrix printer?

The only difference between an LED printer and a laser printer is that in the former, an image is drawn on the photodrum using LEDs.

In both cases there is light. Refilling occurs using powders.

Therefore, the charging scheme is no different from that used for laser devices.

Most LED models print in black and white ink, but there are also color models.

Therefore, printing mechanisms contain not one toner, but several.

LED models are used both for home use and for office needs.

They are good in that they are able to quickly print large volumes of graphic information.

A matrix device is a type of inkjet machine, but unlike the latter, it has worse print quality.

Today it is practically not produced, since it is in the lowest demand due to high noise, slow speed, poor printing and lack of color.

Refilled using the same technology as the jet device.

You also need to turn it off, take out the container, open the sticker with holes and pour black paint into a special compartment using a syringe.

As is the case with other devices, everything must be done as carefully as possible, since there is a possibility of damaging the device.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Differences between LED and laser devices

How to refill an LED or matrix

Refilling an LED printer is no different from the same procedure for a laser printer. In essence, this is the same technique, and the difference between them is only in the method of changing the charge on the photodrum, which has nothing to do with the process of replenishing toner.

Instructions for refilling a dot matrix printer:

  1. Prepare a minus screwdriver in advance and buy a special tape. This can be done at any computer store in your city or on the Internet. The width and length for each device model may be different. The tape is packaged in a Mobius ring or a regular one. How to refill an inkjet cartridge at home with your own hands photo
  2. Some models may require refill paint.
  3. Use a screwdriver to remove the cartridge cover. Pay attention to whether there are latches that can hold the structure. How to refill an inkjet cartridge at home with your own hands photo
  4. Take a photo of the position of the old tape inside the cartridge, and only then proceed to remove it.
  5. We put a new skein according to the marks, as it was.
  6. Leave the coil outside and close the lid. How to refill an inkjet cartridge at home with your own hands photo
  7. Use a special crank to tighten the entire roll of tape inside. How to refill an inkjet cartridge at home with your own hands photo
  8. Everything is ready – the dot matrix printer is filled with new consumables.

How to refill an inkjet printer?

Inkjet printer is widely used in many homes due to its ease of operation.

It makes printing photos and making documents easy. The only drawback is the speed of printing documents.

Before you start refilling your inkjet printer with ink, you need to choose the right blueberries.

The instructions usually indicate which model of cartridge was inserted.

You should buy paint based on the model.

Unfortunately, printer manufacturers do not produce ink, so you need to carefully select it from intermediaries.

It is better to give preference to more expensive models to avoid poor printing, dry nozzles and a faulty printer.

You can refill the hp cartridge step by step:

Remove the cartridge by pressing the button that locks the cover;

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Removing the container

Examine the tank and select the compartment required for refilling (black or colored).

As a rule, they have stickers on them, under which there are holes for ink;

Просмотр этикетки резервуара
View Tank Label

If there are no holes in the paint compartments, make it yourself using a needle;

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Making holes with a needle

Take out a syringe with a thin needle and draw exactly 2 milliliters of paint into the syringe.

Insert the needle to the middle and slowly introduce paint into the compartment (fast introduction of paint will lead to damage to the device);

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Fill the reservoir with a syringe

Do not allow bubbles or liquid to spill, and do not inject more than the specified amount.

If the container is overfilled, remove some of the paint with the same syringe.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Remove excess liquid

Wipe the base with alcohol and return the sticker to its place.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Wipe the tank

If you need to refill a Canon printer cartridge with a color print head, you need to take three different syringes and mark them so as not to get confused.

Pour 2 milliliters of paint into each syringe and carefully insert them into the corresponding holes. At the end, also treat everything with alcohol.

Warnings

When refilling, do not touch the protruding wires and printer contacts located at the bottom and in front with your hands.

Due to oily hands, contacts may be broken and the printer may no longer print efficiently. Rubbing alcohol can fix this.

In addition, you should never insert an overfilled brother cartridge into the printer system.

This may cause permanent damage to the entire device.

After refueling, you need to make sure that everything was done correctly.

You need to print a few test pages. If you fail to print the document the first time, you should try a couple of times.

It may take several prints for the ink to reach the printing mechanism.

It should be remembered that ink must be removed using a special solvent. It is dangerous for the delicate skin of your hands.

In addition, it can ruin clothes. Be careful and be sure to wear gloves.

Important! The printer must be recharged while it is off.

Otherwise, in addition to the fact that things may get dirty, thermal burns, hand injuries and other unpleasant situations may occur.

Как заправить картридж самому: Инструкция для всех принтеров 🖨
Correct refueling

Soaking in washing liquid

If the cartridge begins to wear out or stops printing altogether, it can be cleaned with a special cartridge wash prepared according to one of three recipes:

  • acid (HP color cartridges): essence of acetic acid 10%, alcohol 10%, distilled water 80;
  • neutral (suitable for any printer): pharmaceutical glycerin 10%, ethyl alcohol 10%, distilled water 80;
  • alkaline (Epson, Canon): 10% ammonia/ammonia, 10% ethyl alcohol, 10% glycerin, 70% distilled water.

Before resuscitating a dried cartridge with this composition, it must be carefully filtered in every possible way.

Under no circumstances should cartridges be washed with ordinary (non-distilled) water! This leads to scale accumulation in the nozzle area and damage to the cartridge. Don’t be too lazy to go to the nearest auto store and spend 80 rubles on a 5-liter bottle of distilled water!

If one type of acidification doesn’t work, try another.

Excellent results are obtained by using green “Mister Muscle” as a glass washing liquid (with ammonia).

Mister Muscle is diluted with distilled water in a 1:1 ratio and used as a wash.

How else can you wash the printer head at home? Instead of Mr. Mask, you can get cheaper “Everyday” glasses and mirror cleaners.”

Black

To refill the black ink tank, proceed as follows:

  • Place the cartridge on a table with a piece of paper or old newspaper laid out.
  • It should be in the position with the filling holes facing up.
  • Those are in most cases hidden behind stickers, which should be carefully removed with a knife. Put them aside, they will come in handy later.
  • Fill the syringe with 5 to 8 ml of paint.
  • Insert the needle into the threading path at a 45 degree angle. Insert no deeper than 2/3 of the height of the cartridge. There is a washcloth inside, so there will be slight resistance.
  • The hole must be at least a millimeter wider than the diameter of the needle so that air can escape from the compartment during refueling. Paint bubbles can arise precisely because of it.
  • Start pressing the plunger slowly.
  • Be careful not to let the paint bleed out. As soon as this happens, stop filling. Pump out the excess back into the syringe.
  • Now you can blot the nozzles into a napkin to check the quality of the print. It should be clear and rich.
  • The top can also be wiped down to ensure a completely clean surface.
  • Do not forget to return the sticker to its place, but do not cover the air channels. This is an important point – keep an eye on it.