How to print a photo of the desired size on a printer quickly and easily

Introduction

In many ways, this approach was facilitated by the development, popularization and mass implementation of users of personal computer devices in many areas of activity. Presented both in a stationary personal version and in a mobile final form, computer devices have completely taken over not only the processes of creating materials, but also ensure their uninterrupted movement and safe storage, allowing users, whenever necessary, to contact and immediately use any desired type of demand. information resources.

Especially often, directly for personal individual consumption, users use cameras built into mobile computer devices or presented as separate specialized equipment, for example, digital cameras, to create a variety of photographs and memorable images.

And following the general development trend, almost the entire available volume of digital photographic materials is stored on a variety of electronic storage devices, such as a personal computer hard drive, “USB drives” or “SD cards”.

Despite the significant convenience of this method of arranging user images, quite often there is a need to obtain a physical copy of the image on paper. And in this guide, we will show you how to print photos in the Windows 10 operating system.

Since printer software may differ for each printer manufacturer, we will focus on the built-in printing tools offered in the Windows 10 operating system. The first method does not require additional software, except for having a working and correct driver for the printer you are using.

The second method uses the Photos application developed by Microsoft specialists, which also only requires a printer driver. In the final section of the guide, we’ll take a further look at ways to print images from four popular web browsers.

Paint

1. Right-click the file, select “Open with” and select Paint from the list provided.
   
2. Another option is to find the program through Start. The paint belongs to the “Standard” category.
   
3. When the program opens, select the top tab “File” – “Open” and load the image.
4. Follow the path “Main Menu” – “Print” – “Page Settings”.
   
5. In the window that appears, set the paper size, feeding method, image orientation, centering, margins, scale. Finally, click OK.
6. The next step is to go to the “Print” option in the main menu.”
   
7. In this window, select a printer and configure additional settings. When everything is ready, click “Print”.

Possible problems with Epson printers when printing photos

Around 2005, Epson banned borderless printing on its printers on paper sizes slightly different from 4 by 6 inches. The reason for the innovation was most likely the company’s greed. In addition, at that time, Chinese suppliers could not particularly boast of the range of supplied paper. Epson printers simply wouldn’t print around 5mm and would throw the paper out of the tray.

The craftsmen simply glued an additional strip of paper so that the sensor did not trigger when the end of the sheet approached. The company itself did not lift the restrictions for about 10 years, until third-party manufacturers brought high-quality 4 by 6-inch canvases to the market at similar prices.

• If you are using an old-fashioned Epson machine, then you should choose 4R paper type or accept the unprinted area. In modern models the situation has been resolved, but not completely.
• In the print settings, you need to specify the exact canvas size in millimeters. But you won’t be able to directly print files from flash drives. The technical characteristics of PPE (if necessary) indicate from 150 to 360.

Common problems encountered when printing on any device:

• Dark background photo. The problem is the wrong choice of card. Most likely, a matte and rougher canvas was purchased. It should be replaced with a shiny one. On it, all objects will be clearer and without torn edges.
• The photo is too light or too faded. Toner save mode is enabled in the printer settings. And this problem also occurs when using non-original printer cartridges.
• Photo shows blurred areas or solid white streaks. A foreign object may have entered the machine’s opening through which paper is sucked. Or the path is dirty with toner residue. All internal parts of the printer must be clean.

How to print a 10 × 15 photo on an Epson, Canon, HP and other printer: a selection of programs, tips, advice.

In case of problems (especially of a technical nature), it is better to entrust the printing device to the service department. Self-analysis violates the warranty and may make it extremely difficult to reassemble the device.

How to print 10 by 15 borderless photos on photo paper

Images from a computer can be printed on a regular printer, just like text documents. A picture usually requires a lot more ink, so I would like to print everything correctly the first time, without errors.

How to print a picture on a printer from a computer

Before printing directly, check a few things to make sure your computer is ready to print (you can skip these steps if you are sure everything is ready):

Connect the printer correctly.
Ideally, try to find the printer manual and make sure it is connected in the recommended manner. Turn it on and make sure it is ready to work (usually these points are spelled out in detail in the instructions).

Checking printer settings

Clear the print queue. Open Control Panel and go to the “Devices and Printers” tab. Here you will see different categories, although you will only be interested in “Printers”. The list of available printers will include both real models connected to a PC and virtual models (some programs create them for proper functioning).

Left-click on the model of your printer that you will use. A “View Print Queue” button will appear at the top, which opens a list of all documents stored in the queue. If the list is empty, do nothing, but if there is something left in it, you can delete unnecessary documents.

View Print Queue button

Please note!
Here (in the “Devices and Printers” window) you can check for errors in the operation of devices. Right-click on the printer you are using and select “Troubleshoot.” Windows will check the functionality in a few seconds or minutes, then offer fix options (for example, reinstalling the driver from the official website of the developer).

Item “Troubleshooting”

Now use one of the options for printing the picture.

We are in contact

I am the owner of an Epson L222 multifunction printer. It is located at home and is used for personal purposes to print photographs and pictures. I’ll say right away that the device prints photos in excellent quality and in general there are no complaints about Epson in terms of quality.

But when printing photographs in 10×15 format, I encountered the following problem: if you select this paper format and check the “Print without borders” checkbox, then at the end of the print an unprinted area appears, in simple words a white stripe 3-5 wide mm. At the same time, when printing photos with a frame, the prints are perfect. This puzzled me a little and I started looking for a solution to the problem on the Internet.

Now a few words about what they write on the Internet. I won’t go into details and will tell you a few words about each method of solving the problem:

1. First solution. Official. To print photos on this Epson printer, in the print settings we select the document size 10 x 15 (4 x 6 in), Epson Premium Glossy paper type. The manufacturer seems to be hinting that this is the paper that needs to be used in order for the photo to turn out without jambs.

Therefore, we look for where Photo Paper for the Epson Premium Glossy Photo Paper 10×15 printer is sold – and print on it. Why does it produce photos that fill the entire sheet? – because it is longer than 15 cm, and at the end of the paper there is a die-cut margin – these same 3-5 mm, which after the printed photograph you just need to tear off. The method works, but is expensive, because… original Epson paper 20 sheets costs the same as 500 sheets of non-original paper.

2. Second solution. Not complicated, but not convenient either. The essence of this method is to imitate the size of the original paper. Take a sheet of paper and at the end of the sheet paste a regular sticker across the entire width of the sheet. That is, we imitate exactly that part of the original paper that should come off after printing.

3. Third solution. For geeks. In my opinion, the most absurd and not at all rational. Here you will need the services of an engineer to repair such printers. It is necessary to disassemble the entire machine and change the position of the paper sensor so that the printer recognizes non-original paper as original.

4. Fourth solution. Software. Everything is very simple here. There are special programs for printing photos, where the 10 x 15 format is built in as a template and with the help of these utilities you can easily print photos both on original paper and on non-original paper. But, as a rule, all such programs are paid, because… the problem is known to their developers and they are warming their paws on it.

Having familiarized myself with all the methods (perhaps this is not all, these are just those that I personally found on the Internet), watching videos, reading forums, I came to the conclusion that all these methods are completely unsuitable for me. No way. After which I asked myself, is it really impossible to defeat the printer without coming up with crazy ideas? (this is exactly what I consider all except the first method). But as they say, everything ingenious is simple.

5. Fifth solution. The easiest. The most rational thing. The most reliable. The idea is not to ruin the device and not to pervert the paper, but simply to create exactly the format that we need in the paper format settings. It’s very strange why I didn’t find this method either in Yandex or Google.

Therefore, below I will describe in detail how to create the desired paper format – it is not at all difficult, and the problem with the white stripe at the end of the photo is removed once and for all. This method is suitable not only for Epson L222, but also for any other brand of printer.

Now, in order. Detailed tutorial.

• In the lower right corner, in the tray (where the time is) look for the printer icon – right-click – printer properties (hereinafter as in the video)
• First you need to create a profile for the paper size. In the window that opens, look for the Document Size option – Click – Select from the drop-down list – Custom
• Now you need to set the paper sizes. Check the box – Without margins – Select sheet width 101.6 mm – Set paper length to 150 mm. Rename the profile as it suits you. I called it – Photo 10 x 15 (Without stripe) – Click Save. The newly created profile should appear in the list of profiles. Click OK
• Returned to the printer settings window. Now we need to create a Quick Profile for printing. To do this, set the default settings for this profile. In the Document Size field, select the newly created size – Photo 10 x 15 (Without stripe) – Photo quality – High – And now you need to save the current settings – Click on the Add/Remove presets button
• In the window that opens, we need to write down our settings in the Quick Profile. To do this, in the Name field, enter a name that is convenient for you – I called Photo 10 x 15 cm book (without stripe) – Next, in the field below, select Icon (the one you like best) – Click Save – Close
• That’s all. Everything necessary has been done. Now you can print 10 x 15 photos without borders and without white stripes over the entire area of ​​​​the material. The created profile is also available for printing in any application, such as Epson Easy Photo Print, Windows photo viewer, Photos application, and indeed in any other photo application. Thank you for your attention.

I also want to add that we provide repair services for printers from kyocera, hp, samsung, canon and other manufacturers and almost all office equipment.

Source

Print photos using hp printer | HP® Customer Support

Recommendations

For information on how to print photos on a printer, see below.

Save a photo prepared for printing.

To do this, select Save As from the File menu.

In the window that appears, you need to enter the File Name. By default, the original name will be suggested, but maybe the original file is still needed! Therefore, we give the file a different name.

File type – JPEG.

Please note which Folder is offered for saving files. It often happens that they automatically click the Save button, and then start searching for a long time to find where the file was saved. By default, the system suggests saving to the location where you last saved.

It is better to create a new folder for this purpose, calling it, for example, “For printing”.

So, after you have selected the folder and named the file, click the Save button (Figure 7).

In the window that appears, set the image parameters. By default, the Quality window is set to 12. In this case, the file turns out even larger than the original one. Quality 10 is quite enough. Now press the OK button and proceed to preparing the next photo.

Well, when all the photos are ready, you will dump the entire “For Printing” folder (or as you called it) onto a disk or flash drive and take it to the photo lab.

Go to other Photoshop tutorials:

1. Crop the image.
2. Saving photos for the Internet.
3. Lightening – darkening the image
4. Photoshop Tool – Patch

P. S. If, after studying all these lessons, you have a desire to improve your knowledge of Photoshop, that’s commendable! But you can’t learn the great and mighty Photoshop in 2 days.

Are you planning to work professionally with Photoshop? Go to the page: Photoshop from scratch in video format This is the best Video course on Photoshop for those who seriously want to engage in photography and photomontage.

The author regularly sends new lessons, although I don’t need that many – I’m not going to work as a photographer.

Technical requirements for digital printing