How to make a paper boat with a sail. Origami boat step by step instructions – Origami boat watch online video from I Want to Create in good quality.

Boat folding patterns for beginners

A classic paper boat using the origami technique – the simplest option – is folded according to the following pattern:

  1. A rectangular sheet located vertically is folded in half.
  2. The resulting blank is placed with the fold point up, and both upper corners are bent to an imaginary center line vertically, so that a narrow unused strip remains at the bottom.
    Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
  3. The bottom strip of the top layer of the workpiece is bent upward, then the rectangle is turned over to the other side and the second strip is bent.
  4. Using corner bends, the folded strips are fixed in one position.
  5. Then the workpiece is opened from the inside and folded into a square by placing its parts on top of each other so that the initial fold becomes the diagonal of the resulting square. After folding, the corners straighten.
  6. Now the top sheet of the resulting square piece, lying in the diamond position, is bent diagonally to match the opposite corners.
  7. The workpiece is turned over to the other side, then the same action is performed. At this stage, the square turns into an isosceles triangle.
  8. Next, the triangular blank is opened from the inside by combining opposite corners and again turns into a square.
  9. The ship unfolds from a square blank – for this, the upper corners are pulled in opposite directions at the same time.
  10. The middle straightens out, and a simple paper boat can be launched into a pond.

There is another option for folding a boat for beginners, it is the simplest, and as a result of five minutes of work you get a yacht:

  1. On a square sheet of paper of any color, you need to fold it horizontally diagonally.
  2. Now a vertical valley fold is performed.
  3. An imaginary line is drawn in the lower triangle, as shown in the diagram, along which the fold occurs.
  4. The bent part of the triangle is bent, returning to its original position. Once the folding technique is mastered, steps 3 and 4 can be simplified into one by simply folding the desired part of the triangle.
  5. Now, along the marked lines, you should make “valley” bends, carefully straightening the right angle, which is located below the marking.
    Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
  6. Using glue, the 2 parts of the yacht are connected to each other, then the bottom and hull are carefully straightened so that the product becomes stable.

If you complicate the previous diagram a little, you might end up with an ocean liner:

  1. On a square sheet of paper of any color, you need to make 2 diagonal folds, thus marking 4 triangles.
  2. Then you need to bend the upper corner of the square blank, arranged in a diamond shape, towards the center.
  3. Now the same corner is bent again, only in the opposite direction.
  4. And once again the corner, only this time smaller in volume, needs to be folded back towards itself. When the technique of folding the boat is mastered, steps 2-4 are simplified into one step, folding occurs with a triple zipper.
  5. Next, the left side of the workpiece is folded in such a way as to cover the right side.
  6. Now you need to mark an imaginary line, as shown in the diagram, for folding the lower parts of the workpiece into a “mountain”. Then very carefully straighten and bend the corner located below the line. After this, the parts of the workpiece indicated in the diagram need to be bent along the intended line “mountainwise”.
    Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
  7. The bent corner is carefully smoothed out, and the workpiece is turned in the desired direction.

: master class “two-pipe boat” using the origami technique

Elena Puchkova

Master class “Two-pipe boat” using the origami technique

Мастер-класс «Двухтрубный кораблик» в технике «оригами»

In classes on cognitive development, the children of the preparatory group and I “travel” a lot
across countries and continents, seas and oceans. And of course, at the same time we “use”
different types of transport. Very often we have to build ships and steamships
, since water barriers in the form of seas arise on our way. We recently visited the resort cities of the Krasnodar Territory, and since the cities are located on the Black Sea coast, we needed water transport for excursions. I invited the children to try themselves in the art of origami and make a two-pipe boat
.

Origami
– the art of folding paper figures without scissors or glue. Origami is a Japanese word
, and it is translated as “folded paper”
. It was the Japanese who were the first to make different figures out of paper.

Using origami
Fine motor skills develop, fingers are trained, and children’s speech develops. Finger training prepares the hand for writing. The movement of the hand and fingers becomes precise and coordinated.

Master class
« Two-pipe boat
»

in origami technique
»

Problems
:

• Introduce children to methods of transforming a square, develop spatial orientation

• Develop the ability to act with verbal instructions from the teacher

• Develop fine motor skills

• Cultivate hard work, the ability to finish a job

We need
: Square shaped colored paper.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

1. Find the middle of the square, mark it with a simple pencil and fold the square twice diagonally.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

2. Fold all corners towards the center.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

3. Turn the new square with its back side facing you and bend the corners to the middle again.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

4. Repeat this action 2 more times.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

5. Now we take out the pipes and stern.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

6. Our boat is ready to sail
!

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

: master class: “ship” applique

Svetlana Chantseva

Master class: Application “Boat”

Мастер-класс: Аппликация «Кораблик»

Master class
: Applique
« Ship
»

I bring to your attention a master class on making applique
« Ship
»

. Such boats
The children gave it as a gift to their dads. Completing the work does not require much time. They are quite feasible for children of the middle group; the teacher only helps to cut out the sun and clouds.

To complete the application, is required
: blue or light blue cardboard, colored paper, scissors (regular and curly, ruler, pencil, PVA glue, brush, napkins.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

The first stage of work is cutting out the waves with curly scissors and gluing them onto cardboard.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

The second stage is cutting and gluing the parts of the boat
floating on the waves. Children decide for themselves what color the sails will be, what shape the flags will be, and how many.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

The final stage is making the sun and gluing the clouds.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

The works turned out to be very colorful and were delivered to the young masters
great pleasure.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Thanks for your attention!

: greeting card for Defender of the Fatherland Day “ship”. master class

Larisa Savchuk

Greeting card for Defender of the Fatherland Day “Ship”. Master class

Поздравительная открытка ко Дню защитника Отечества «Кораблик». Мастер-класс
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

The master class is designed for preschool children for teachers and parents.

Assignment:
as a gift for the holiday on February 23, decorating the interior of the room.

Goal:
making a DIY greeting card for the holiday of fathers and grandfathers

Problems:

– develop the ability to make cards with your own hands;

– develop aesthetic and artistic taste, creative abilities of children;

– improve application skills;

– to cultivate independence, accuracy, love for loved ones

Required material:

– silver, golden, brown cardboard;

– white and colored paper (yellow, red, blue);

– scissors, simple and with zigzag blades;

– printed congratulatory poems and inscriptions “Happy February 23”;

– glue – pencil.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Sequence of making a postcard:

Draw templates on cardboard and cut them out.

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Make blanks for the base of the card:

– fold a sheet of golden (silver) cardboard in half,

– cut a round hole with a diameter of 8 cm on the front side of the base,

– glue a sheet of yellow paper

to the right inner side of the postcard

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Using the template, prepare all the details for the card, cut out inscriptions and congratulatory poems

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Glue a poem, an inscription and a star on the inside

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

On the front side of the postcard, place an image of a boat sailing on the waves.

The greeting card for February 23 is ready!

How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.
How to make a paper boat with a sail. Origami boat step by step instructions - Origami boat watch online video from I Want to Create in good quality.

Origami paper: the best choice

The main advantage of this technology is that it does not require additional tools to use. And it doesn’t matter whether simple folding patterns are used or not.

The only thing you need to purchase in advance is paper. It only takes a few minutes of free time and a great desire to create a paper figurine.

There is no need to buy any other instruments, so we can say that this hobby cannot harm your financial well-being.

But this does not mean that the choice of the only tool, which is paper, should not be taken seriously. This is a common mistake that people make when just starting to learn the art of origami.

It is important to remember that it is permissible to use not only ordinary white paper, but also colored sheets, which can be freely purchased in specialized stores for artists.

Of course, each person can choose the color of paper that he likes best to create his ideal figurine. However, it is best to use those sheets whose front and back sides are different. This will help greatly simplify the process.

Because while folding the sheets, it will be clear which side the person is currently working on. After all, by mixing up the front and back sides, you can completely ruin the craft.

It is equally important to choose the correct paper thickness. Do not use sheets that are too thin. It is only at first that it seems much easier to work with them.

In reality this is not so, and this becomes clear already in the process of work. After all, thin paper tears very easily. Only masters who have already managed to get used to it and have acquired enough skills and knowledge can work with it. Beginners will not be able to achieve a positive result.

Making a sea postcard (step 2)

Now you will need a postcard blank, cord, mesh and a boat.

Основа открытки, сетка, кораблик
Postcard base, mesh, boat

Let’s see where it’s best to place the boat on the postcard.

Ищем место для композиции
Looking for a place for a composition

Glue the cord to the mesh, and glue the boat on top.

Приклеиваем шнур, сетку и кораблик
Glue the cord, mesh and boat

Tear off a piece of the card. You can print out an antique map or a battle map. It would be better if there were more seas on it, so that the theme of navigation would be preserved. Don’t try to make a smooth edge, let it have an antique effect – that’s the beauty of it!

Кусочек карты
Map Piece

Take the base of the postcard and randomly glue the card.

Приклеиваем карту
Glue the card

Cut off the excess card.

Излишки карты отрезаем
Cut off the excess card

Even the blank postcard itself looks amazing.

Заготовка открытки с картой и морем
Postcard blank with map and sea

Take a blank boat with a mesh and cord and glue it onto the card.

Приклеиваем кораблик с сеткой и шнурком 1
Glue the boat with mesh and cord 1

We glue sequins on the boat – windows.

Приклеиваем пайетки
Glue the sequins

An origami paper boat sails across the endless sea towards new adventures!

Оригами из бумаги кораблик
Origami paper boat

How to make a waterproof paper boat

How to make a ship out of paper so that it does not get wet and does not sink in the water:

  1. 1st method – tape.
    It is necessary to cover the body and bottom of the paper boat with tape, both outside and inside. If during processing with tape it becomes necessary to form seams, they must be made minimally vulnerable. To do this, strips of tape should be placed a few millimeters on top of each other so that water cannot penetrate into the joints between them for as long as possible.
  2. 2nd method – several layers.
    A multi-layer boat will take much longer to get wet than a regular two-layer boat. To make it, you need to take not 1, but 2 sheets of paper, and then fold it according to the diagram. Such a boat will turn out to be denser; more layers will make it heavier, so the bottom should be made very wide.
  3. 3rd method – wax (paraffin).
    It is this product that can protect the paper well from getting wet. It is necessary to light the candle and wait a little while the wick flares up and melts the wax to a liquid state. After this, wax should be dripped onto the boat, immediately spreading it over the hull using your fingers. All areas of a homemade vessel need to be lubricated: both external and internal. Do not use too much wax – it can weigh down the product and make it unstable.
    Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
  4. 4th method – Vaseline oil.
    Using a brush, this product should be applied to the bottom and lower part of the boat’s hull, then allow the product to dry a little.
  5. 5th method – glossy sheets.
    A boat made from glossy magazine sheets will last a little longer on the water without harm than one made from plain paper.
  6. 6th method – PVA glue.
    It must be poured into a jar or glass, and then applied to the bottom and body of the paper vessel using a brush, and then allowed to dry completely in a warm place.

How to make a paper boat with your own hands

To begin with, I want to show what can ultimately come out of a simple sheet of paper. I think most adults certainly know and remember such beautiful products from their childhood.

But our kids may not know what can come out if they put in time and effort. So let’s correct this situation and show what wonderful crafts can be made. And even if you don’t have much snow and there are no streams in sight, don’t be upset, because these ships can also be used as a toy, or you can pour water into a basin at home and start competitions in the bathroom.

  • You can use both white and colored paper
  • You can make a sailboat and paint your masterpiece
  • Types of paper boats
  • And this is a two-pipe version
  • Multi-colored ships. These can be completed for a school competition, for example, by February 23

Now that you imagine what we can get from plain paper, I suggest not to hesitate, but to get straight to the point.

First, I want to show you how you can make a boat from our childhood, these are the ones we launched into the streams in the yard.

This option is certainly not an easy one, so if you are just starting to master the technique, then be careful and be patient!!

To make any paper boats with your own hands, we only need one sheet of plain A4 paper.

Manufacturing process:

1. Take a sheet of A4 paper and fold it in half.

2. Now you need to bend the corners so that you get two identical triangles.

3. Next, fold the bottom part on both sides.

4. Wrap small triangles on both sides too.

5. Unfold the product on the other side and bend the lower parts in half on one side and the other.

6. Unfold from the inside and fold upward again.

7. We unfold it and get a finished boat!!

How to make a boat from scrap materials | 50 photos of ideas for making boats

What boy doesn’t like to launch boats? Website “Mom can do anything!” I have collected for you 50 ideas with photos on how to make a boat with your own hands from scrap materials.

Paper boat

We all made paper boats as children. These are easy to make, and the material is always at hand. And if you take not just paper, but for example packaging from sheets for a printer, then the ship will last on the water for several hours!

кораблик из бумаги схема


схема как сделать кораблик из бумаги



как сделать кораблик из бумаги своими руками


Plastic bottles

In the modern world, plastic is used everywhere and finding a similar bottle for making a boat is not difficult. кораблик из пластиковой бутылки


парусник из бутылки


маленький кораблик



A shampoo bottle is also useful for making a sailboat. Pierce it with a wooden skewer, attach a paper sail and your ship will be unsinkable.

кораблик из бутылки от шампуня



парусник


Vegetable ship

Vegetables can also be considered improvised materials and it is just as easy to make a craft from them.

Cut out the middle of the zucchini, scoop out the flesh, insert a stick and use a piece of paper to make a sail. Add details: cut small windows, make a sailor from carrots and potatoes. корабль из овощей


поделка корабль из овощей


интересная идея для изготовления корабля из овощей


поделка корабль из кабачка


картошка


A boat can be not just a craft, but also an option for serving a dish. Surely the children will want to eat this one 🙂

корабль из дыни


сервировка блюда из овощей

You’ve probably accumulated a lot of Popsicle sticks over the summer. It’s time to make crafts out of them. Wooden sticks will be an excellent building material. Paint them in different colors and start making them.

из палочек от мороженого


кораблики из палочек от мороженого


плот из палочек


KJL_5548


Поделка корабль из палочек


If you don’t have Popsicle sticks, just go to your nearest park and collect small twigs. Fasten them together with a rope, add a sail and the boat is ready.

кораблик из веточек


It’s autumn and that means it’s time to make boats with sails from leaves. They can be easily attached using a heat gun or a piece of plasticine. Here are some ideas:

корабль из осенних листьев


маленький кораблик из осеннего листа


скорлупа от грецкого ореха


кораблик плывет по ручью


Very beautiful and comfortable boats are made from tetra pack packaging. You can easily put your children’s favorite toys in them.

корабль от упаковки тетропак

And this is a detailed diagram for making a pirate ship from kefir or milk packaging. It is in English, but generally understandable. как сделать корабль из упаковки от кефира


маленький кораблик из упаковки от молока

A large cardboard box can easily be turned into a ship for your child to captain.

большой корабль из картонной коробки

Using a smaller box, make a sailboat for his toys. из картонной коробки


You can turn any unnecessary object that can float on the water into a boat. For example, coconut shells. Place a couple of sheets of paper on a wooden skewer and secure it inside the shell. корабль

You can also make small boats from Kinder Surprise eggs and walnut shells. кораблик


идея как сделать кораблик


разные кораблики

Add a spectacular sail to the paper ship for great beauty. кораблик из бумаги

картонный кораблик

Wine corks are an excellent material for making small rafts. They do not sink and swim well, and are also very small and can even fit in a jar. пробка


маленькие корабли из пробки


маленький кораблик из пробки


из крышки


корабль из крышки

Egg trays turn into spacious ships. In their recesses you can easily place both Kinder Surprise toys and cute little animals. корабль из лотков от яиц


корабли

A ship can be made from almost anything, even ice. Pour water into an ice container, insert the sticks and place in the refrigerator for a couple of hours. Make two holes in a sheet of paper with a hole punch, take out the boats and put the sheet on a stick, the sailboat is ready. из кусочков льда


A few more ideas for making a ship from scrap materials: из пустых упаковок


красивый корабль


ребенок запускает парусник


губка


парусная яхта


парусник


из ткани

Classic model

For the boat “from childhood” you will need an A4 landscape sheet. You can also take a notebook, it has the same proportions. If the model is intended for children’s play and “swimming”, it is best to use office paper, and make decorative interior elements from craft or “kami” with a print.

Step by step instructions:

  • Place the sheet vertically, wrong side up.
  • Fold the bottom edge to the top.
  • Bend the right corner towards the left and make a small mark.
  • Open the blank.
  • Focusing on the fold from step 3, lift the right and left corners up. They should “meet” in the middle.
  • Iron the fold lines well.
  • Turn the workpiece 180°.
  • Fold the bottom edge of the near layer along the line of the base of the triangle.
  • Turn the workpiece over to the reverse side.
  • Repeat step 8.
  • Open the fold we just made and bend the right corner.
  • Repeat the same action on the left.
  • Return the lower part to its previous position.
  • Opening the boat from the inside.
  • And flatten it in the transverse direction.
  • We “tuck” the protruding corner on the left under the right valve. We do the same on the reverse side.
  • Fold the middle layer in half from bottom to top.
  • Repeat step 17 on the back.
  • Turn the model sideways towards you. Let’s open it from the inside.
  • And flatten as in step 15.
  • Take the right and left valves and pull in opposite directions.
  • When the figure takes the shape of a boat, carefully iron all the folds to fix them.
  • Bend the central parts of the sides a little so that the triangle inside is visible. It depicts a sail.
  • If you turn the boat over and open the central part, it will stand stably on a flat surface.

Origami ships assembled according to these step-by-step instructions are an excellent decor for a budget wedding in a nautical or beach style (see photo). The model can be decorated with a toothpick mast and a flag on which a wish will be written to the newlyweds or the name of the guest at the table.

Paper boat step by step: origami boat from childhood

Кораблик из бумаги

Detailed instructions with photos, a simple paper boat for children and more.

I learned to make this origami boat as a child. In early spring, with the appearance of streams, we mercilessly tore off the leaves from our notebooks to make a paper boat and compete on its speed or range. I can make it at any time, even with my eyes closed. Until now, when I am forced to wait for something, if a rectangular leaf falls into my hands, it immediately turns into a boat, to the delight of my children or those around me. I hope I have convinced you of the importance of the ability to make origami
boat? smile
Then let’s get to work.

Prepare a rectangular piece of paper. The size can be absolutely any.

Кораблик из бумаги

Fold it in half.

Кораблик из бумаги

The next step is optional, it only serves to determine the middle. But at the initial stage you can turn it on. Fold the paper again, for example, from right to left.

Кораблик из бумаги

Open the paper, fold the right and left corners down, aligning the sides with the fold in the middle.

Кораблик из бумаги

There will be double paper at the bottom, take the top one and also point it up, making a fold along the underside of the corners.

Кораблик из бумаги

Do the same steps with the bottom of the paper on the reverse side.

Кораблик из бумаги

If there is excess on the sides, fold the corners into the middle on one side.

Кораблик из бумаги

On the other.

Кораблик из бумаги

Open the sides at the bottom of the resulting triangle.

Кораблик из бумаги

Carefully connect the right and left corners together.

Кораблик из бумаги

There will again be two pieces of folded paper at the bottom, fold one side up.

Кораблик из бумаги

Then the second one, connecting the lower corner with the upper one.

Кораблик из бумаги

And again we have a triangle. You also need to do the same actions with it as last time. Open its doors slightly at the bottom.

Кораблик из бумаги

Open further and connect opposite corners.

Кораблик из бумаги

Two triangles are formed on the sides. Pull them to the sides.

Кораблик из бумаги

Stretch it completely, straightening it with your fingers and bending the sides. That’s it, the origami paper boat is ready. Despite the long description, it can be done in a matter of seconds. The main thing is a little practice and remembering the sequence of actions.

Кораблик из бумаги

оригами кораблик

The flag is made from a toothpick and a rectangular piece of paper glued to it, with slits on one side.

Кораблик из бумаги

A4 paper boat

How to make a ship from A4 paper:

  1. On a sheet of paper of any color (the shape of the sheet should be square or rectangular), you need to make 2 folds: first horizontally and then vertically.
  2. Having returned the sheet to its original state, you should place it horizontally in front of you, and then bend the opposite parts – upper and lower – towards the center.
  3. Next, you need to bend all 4 corners of the workpiece into a “valley” to form a hexagon.
  4. The new corners formed need to be bent again into a “valley”, according to the diagram – you will get a rhombus elongated horizontally.
  5. Once again you need to bend the corners into a “valley”, of which there are only 2 at this stage.
  6. Then you need to fold the craft into a “mountain” along the center line formed in the process of performing the previous steps. After this, being careful, you should turn the workpiece out using a movement aimed at opening the central cleft.

    Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
    How to make a ship from A4 paper.

  7. At the end, you need to straighten the boat, carefully tucking in all the folds that are located inside.

Colored paper boat

This most popular summer-themed craft can be created not only using the origami technique. This master class features such a bright sailboat!

https://www.youtube.com/watch?v=-It1gUhBX7w

Required materials:

  • colored semi-cardboard in red, yellow and blue;
  • skewer;
  • glue;
  • scissors;
  • ruler;

    marker;

    pencil.

Create the frame of a sailboat. To do this, take blue half-cardboard and cut out two identical strips with dimensions of 18 x 2.5 cm.

  • Using a ruler and pencil, divide each strip into three equal parts. We bend in those places.
  • Glue the two parts of the boat base together along the sides.
  • Next we will create a small part of the ship’s deck. We use blue half-cardboard again.

    Cut out a small rectangle. We measure 1.5 cm from the sides for gluing.

  • Bend along vertical lines and glue the part into the middle of the ship between the bases.

  • губка Now we will prepare a wooden skewer and two pieces of yellow sheet of different lengths to create sails.

    парусная яхта Create small holes in each rectangle. We insert a skewer through them.
    парусник https://www.youtube.com/watch?v=a2DGW3QjVj8
    Cut out a small square from a red sheet. Glue it to the deck. We make a small hole along the diameter of the wide part of the skewer. We insert it.
    из ткани

    Now we cut out a beautiful flag from a red sheet that will flutter in the wind. Use a black marker to highlight the contour lines.

    Glue the flag to the highest point of the sailboat.

    Using a black marker, add portholes and other important details on the paper boat.

    A wonderful paper boat is ready for sea voyages! On the deck you can place small toys of pirates, sailors and the ship’s captain.

    Making an applique – a paper boat

    Another craft option.

    See a detailed master class on paper boat applique here.

    Origami yacht made of paper

    A simple and easy way to make an origami yacht and boat from a sheet of paper

    оригами яхта из бумаги

    оригами яхта из бумаги

    Fold the paper in half. It’s hard, but don’t worry:) оригами яхта из бумаги

    Expand. Then fold the paper in half on the other side. You should see a “ ” sign and paper divided into 4 parts. оригами яхта из бумаги

    After this, fold the top and bottom of the fold into the center. It should look like a door. Now turn the paper and make another door from the remaining sides. The sheet should be divided into 16 parts. Like a little chessboard!

    1. Unfold the entire paper and fold it diagonally
    2. Then unfold and do for the other two corners
    3. Now take each corner and roll it to the center
    4. Rotate the paper 90 degrees so you have short edges at the top and bottom
    5. From the top half, grab the inner corners and fold diagonally.
    6. Press the top middle part in the center.
    7. Rotate 180 degrees and do it on the other side
    8. Rotate the paper 90 degrees, take the top left and bottom left edges and fold along the diagonal fold
    9. Turn over, turn bottom right, and then along diagonal fold
    10. One more step, flip it up and you’re done.

    Enjoy your origami yacht, just don’t put it in the water….

    Origami sailboat

    To make a ship decorated with two sails, you will need a square sheet of single-sided colored paper. Thanks to just such a sheet, the result is a ship with sides painted the same color and snow-white sails.

    Sailboat manufacturing process:

    1. First, you need to make bends on the square workpiece vertically and then horizontally. You should end up with a large square, divided by folds into 4 small squares. Now the same action should be done diagonally.
      Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
    2. Next, you need to place the workpiece in front of you in a diamond shape, the white side up, and bend the “valley” of 2 opposite corners (upper and lower) into triangles towards the center. The result is a design in the form of 2 triangles, on either side of which there are 2 rhombuses.
    3. Then a bend is formed horizontally in the resulting workpiece.
    4. When returning the structure to its original state, it is necessary to simultaneously fold the left rhombus so that its horizontal diagonal moves to a vertical position and then bends inward. Thus, the left diamond should be reshaped into a triangle, fixed by a fold between the upper and lower rectangle.
    5. Now we have a parallelogram with a triangle on the left. Its right corner must be folded with the diagonal of the former rhombus inward. You should get a blank sketched in point 6 of the diagram, which represents 2 triangles – upper and lower, with the upper one consisting of 2 small ones.
    6. The small triangle on the left is a large sail, and the right one needs to be reshaped into a small sail. To do this, it should be bent with a zipper, as shown in paragraphs 6-7 of the diagram.
      Как сделать корабли из бумаги своими руками, с парусом. Пошаговая инструкция
    7. The zipper fold needs to be hidden between the sides of the future sailboat. And below, along an imaginary line, it is necessary to make “mountainous” bends into the structure to form the bottom of the vessel. At the end, the bottom must be carefully straightened so that the sailboat floats better.

    Step-by-step master class on a boat made of paper tubes

    This is a completely new level of skill, requiring perseverance, time, and patience. To do this, strips are pre-cut from paper, wound onto a long knitting needle, secured along the edge with glue, dried and covered with stain or varnish. And then the wicker weaving technique is used.

    To create a ship similar to the ship from the book “Scarlet Sails”, you need:

    • Make a stencil for the bottom by cutting out a piece of regular paper 29.5 cm long by 7 cm and rounding it on one side like the bow of a ship.
    • Using a stencil, we cut out the base from plastic, transferring the drawing with a pencil. We make two such parts, the second one is a little smaller.
    • Along the contour of the larger workpiece, we make holes with an awl every 1-1.5 cm.
    • Insert ready-made paper tubes into the holes.
    • Fold one tube in half, take it by the corner tube, weave along the contour, tracing the strip alternately in front and behind.
    • Repeat the process, forming two rows of stripes.
    • Then we make a bend. To do this, we bring the protruding tube behind the next one and bend it inward. We do this with the remaining strips of paper
    • Coat the edges with PVA glue, let it dry for a day or two, then cut off the excess edges.
    • We take two tubes, insert one into the other, fold them, wrap them around the corner base, and intertwine them with paper vines using the same technique.
    • If the tubes end before the row is completed, add material by inserting another one into the end of the tube.
    • After weaving the first row, we place the second stencil (smaller in size) inside the craft. It will help maintain the shape of the craft while working. It is convenient to place a limiter (flat box) on the bottom and a small weight on top.
    • We continue weaving. If desired, you can add several rows of a different color and use other techniques. For example, start the tubes not at the first, but at the third base.
    • We attach clothespins through one base and continue weaving over them.
    • We arrange the stern in two rows. To do this, simply bend the vine back and continue weaving
    • Coat it well with glue, let it dry, remove the clothespins – we get a beautiful pass in the weaving.
    • We make a bend from the bow to half of the ship. As we approach the middle, we try to press the tubes down. Near the “stern” we raise the tube higher and continue working.
    • Repeat on the other side.
    • We fix everything with glue, cut off the extra tubes – we get the base of the ship.
    • Take four tubes and move them in different directions. Now we place each tube in turn on the adjacent one – this is a spiral weave for the steering wheel. All that remains is to connect it into a ring and arrange it.
    • We cut out parts for the stern and bow from plastic.
    • We additionally coat the blank with varnish, decorate it with a steering wheel, ladders made from the same tubes, and pieces of red fabric placed on a glue gun with bases made from pieces of tubes.

    The process of making an origami boat diagram (step 1)

    How to make an origami boat? Cut out a square from colored paper.

    Вырезаем квадрат
    Cut out a square

    Fold it in half.

    Складываем его пополам
    Fold it in half

    Fold the square in half again along the middle of the sides (this is necessary to form the lines).

    Складываем с одной стороны
    Fold on one side

    Fold two corners towards the center.

    Складываем один уголок
    Fold one corner

    We press the two sharp edges of the workpiece inside.

    Загибаем один край 1
    Fold one edge 1

    Open the blank.

    Раскрываем заготовку
    Opening the blank

    Fold the third corner of the square towards the center.

    Складывает третий уголок
    Folds the third corner

    Fold the third corner up.



  • Bend the third corner

    парусник Fold the workpiece back.

    из ткани

    Fold the blank back


    It turns out that the boat is almost ready.

  • The ship is almost ready

  • We bend the sharp bottom of the boat.
    • Bend the sharp bottom of the boat

    парусная яхта Glue the bottom of the boat.

    Подклеиваем низ кораблика
    Glue the bottom of the boat

    The origami paper boat is ready!

    Кораблик оригами из бумаги
    Origami paper boat