House made of newspaper tubes – weaving master class and features of using crafts (75 photos)

Making the base

Step-by-step instructions with a description for beginners will help you figure out how to make a house correctly:

Draw a rectangle (for example, 8*9 cm) on a sheet of cardboard using a ruler. Cut out the workpiece.

Using a glue gun, attach to the base of the tube. They need to be glued 2 together, according to a certain pattern: at 4 points at equal distances from each other on each side of the rectangle and in the corners.

One of each pair of tubes must be bent upward, the remaining ones must be used to weave the bottom. It is performed using the rope technique. The elements glued to the bottom are the frame.

Take 2 pieces from the stack of remaining tubes and begin to braid the frame. Both of them should go in the same direction, but mirror each other: one passes through the first post from the outside, the other from the inside. The tubes go around the next column in reverse, the first goes from the inside, the second from the outside. Do this for 3 rows.

If the length of the tube is not enough, extend it – coat the tip of the one that ends, and put a new one on it. Continue weaving. After finishing the third row, hide the ends inward and secure them.

They move on to weaving the walls of the house. To make it more convenient to work, it is advisable to place a container of a suitable diameter (mug, bottle) on the base. They begin to weave in the same way as the bottom, but they go not wide, but upward. Perform several rows. After this, you need to mark the location of the future hole with a pencil.

Using a utility knife, carefully cut out a hole. The cut area is glued with a tube, having first slightly flattened it.

Taking a clothespin, connect the ends of 3 tubes. Weave a regular braid. This braid is used to decorate the entrance to the house (using a glue gun, glue it around the perimeter of the entrance hole).

Weaving of the walls of the house continues. When they reach the desired height, close the weaving of the sides, and hide the ends of the tubes in the frame. The wall on which the entrance hole is located and the wall opposite it must continue to be weaved, but gradually narrowing it.

First, make several rows, increasing the tension of the tubes, then connect the racks in pairs, at the very end the remaining ones are woven into one. The result should be 2 triangles.

Tea bag house

As we noted earlier, a tea bag house made from newspaper tubes is a wonderful holiday gift for anyone. This decoration is stylish and will decorate any kitchen.

Please note!

Houses can be of different styles and colors, and the principle of their weaving depends on this. That is why you should select a diagram or process description for a suitable model in advance.

Making newspaper tubes

Before you start creating such a masterpiece as a tea house from newspaper tubes, you must first make the vines themselves for weaving. They are not difficult to make, but you need to know some rules before making them yourself.

You will need a suitable material for production, this could be newspapers, offset paper, or even glossy magazines.

Ordinary A4 paper will not be suitable for the printer; it has a high density and tubes will not be rolled out of it.

Tools for assembling straws

The material has been selected, in our case it is newspapers, now we need to prepare the tools for assembling the tubes. The most important thing is a stationery knife or scissors, with which the newspapers will be cut.

The second is glue, any glue will do: from construction glue to a pencil. The best option is ordinary stationery PVA glue.

In addition, you will need a thin knitting needle with a diameter of 1-1.5 mm. Our newspaper will be wound onto the knitting needle.

The smooth surface of an ordinary table is not suitable for rolling, so many people choose the option of rolling out mats. They are made of silicone and have a bit of rubber, but large cutting boards made of plastic or vinyl also work well.

Everything is prepared and you can get down to business. The first thing you need to do is cut the newspaper correctly. For this purpose, the newspaper strip is folded in half crosswise and cut along the fibers. After that, fold each half in half again and cut again in the same direction.

The newspapers are ready, you can twist the vines. We take one strip of newspaper and place the tip of the knitting needle about 5 centimeters on the lower right corner, begin to twist while holding the tube.

The upper corner is coated with glue and the tube is glued. That’s all, the tube is ready, you need to make a lot of them, they are painted and impregnated with the composition in order to make it easier to weave with them.

How to weave a house from newspaper tubes?

We chose the model of a rectangular house. It is worth rolling up the tubes in advance, but how many of these products will be needed depends only directly on the process and will become clear in the work, so it is better to make as much as possible.

To begin with, the bottom of the house is woven from double posts. One should be shorter than the other. Next, we raise the large vines and tie the short ones with a rope.

We weave rows and make an entrance hole through which tea bags will be fed. Then the weaving will continue, but first, the tubes cut at the entrance are sealed using a braid of tubes.

The weaving should be gradually narrowed towards the top. It’s better to watch how to do this in the video master class. It is difficult to explain the process of creating walls for a roof. Then we finish the edges, process them, and make a roof.

Each craftswoman creates a roof in her own way, depending on her desires and capabilities. The wicker house made from newspaper tubes is ready.

Please note!

A house can be made not only for tea bags. Many people weave cat houses from newspaper tubes. They turn out strong and beautiful and, like tea ones, you can give them to friends and family.

Doll wicker furniture, first release.

And so, we begin to weave an openwork chair. For work you will need: short white tubes (29 cm) – 40-45 pcs., long white tubes (43 cm) – 2 pcs., side cutter, ruler, clothespins, PVA glue, wire, knitting needle (any), round container (I have a bottle from under the juice).





Hello Masters, Apprentices, Apprentices and Guests!!!! I really liked the drawing that Lyudmila Shpakovskaya deciphered for us /node/907812?c=favorite
Luda, you’re a good girl, bright-headed!!! I decided to try it too, but when I inserted working tubes for every two racks, it turned out to be such a “hedgehog” that I got confused. She unraveled and went a different way.








House made of newspaper tubes - weaving master class and features of using crafts (75 photos)

Rita, the drawing is certainly beautiful, interesting, and unusual. But, it seems to me, if it started right from the bottom, the product would look more organic. But that’s my personal opinion. Thanks for showing me how to make a drawing like this!


House made of newspaper tubes - weaving master class and features of using crafts (75 photos)

Oh, Margarita, why should people be so shocked. We need to do it little by little, little by little. Otherwise, bam, here you are like this приветствую
a mountain and not just braids, but each one is awesome. They’re all awesome. Of course there are a lot of questions, the pattern is on the first????? No. 6 – I saw the diagram, but before such weaving, it was like getting to China not even on foot, but crawling. No. 5 I looked and looked and didn’t understand a single thing due to what the wave effect is??? Or do I already have goosebumps? Damn, I’m already wearing two glasses. Like that monkey. But there’s no point. Everything is very, very cool, unusual patterns, weaving супер!
And . думаю
In short, I’ll go and have a better look, probably on the 10th circle.






House made of newspaper tubes - weaving master class and features of using crafts (75 photos)

Well, they surrounded your work in a circle and couldn’t even get through. Well, I finally made it through and… My jaw dropped, my mouth started drooling and there was no one to wipe it. I just sit there spellbound, it’s just some kind of magic. плачу
that I don’t have such beauty, супер!
You have crazy hands, I bow to your creativity, thank you for the MK and diagrams. I haven’t woven anything myself yet, but I’ve made a huge amount of tubes and I’m still afraid to start weaving. With your permission, I am taking your works into my hamster hole and now you are my teacher, I will learn from you. I haven’t seen such colorful works for a long time. цветы
Please us with your masterpieces. Thanks for the positive.

Master class on weaving from newspapers: crib

In the master class I will show you how to weave a crib for a doll. It will be interesting to make toy furniture with your own hands.

Materials and tools

To work you will need:

  • tubes, cut and glued from newspapers;
  • acrylic varnish, paint or stain, brushes for applying them;
  • cardboard;
  • ruler;
  • stationery knife;
  • pencil;
  • glue gun;
  • PVA;
  • clothespin;
  • scissors.

Before you start, it’s worth looking at photos of finished houses made from newspaper tubes to get ideas for decorating your craft.

Finishing of the finished product

When the house is completely ready, they move on to decorating it. You can cover the craft with stain, paint it in the desired color, decorate the roof with a ladder made from tubes, make flower pots – original house ideas and instructions for making them will help with this.

If you wish, you can make a window in the house: cut a hole in the right place, cover the cut with a pigtail, glue two tubes perpendicular to each other, which will act as a frame.

Making a beautiful house from newspaper tubes is quite simple, the main thing is to understand the principle of weaving.

Weaving from newspapers, furniture for dolls – do it yourself
– June 5
– 43334687499 – media platform Mirtesen

Rocking chair, armchair and chair made from newspaper tubes. Master classes on weaving country furniture for dolls from the author Kestrel

<img src="" alt="Плетение из газет. МЕБЕЛЬ ДЛЯ КУКОЛ

(520×369, 93Kb)” width=”620″ height=”auto” loading=”lazy”>
<img src="" alt="Плетение из газет. МЕБЕЛЬ ДЛЯ КУКОЛ

(337×480, 87Kb)” width=”620″ height=”auto” loading=”lazy”>
<img src="" alt="Плетение из газет. МЕБЕЛЬ ДЛЯ КУКОЛ

(315×480, 74Kb)” width=”620″ height=”auto” loading=”lazy”>

I immediately lay in the supports for the backrest. Let’s fill two tubes in one turn. After four racks we will also fill two more.
These racks will be the innermost ones in the back and armrests.

The back and armrests are made with simple (calico) weaving. We braid all the racks in several rows. And then each part separately.

The top of the back was braided with stands – the right one goes through the chintz and the tip is hidden in the weaving, then the left one does the same.
The armrests were wrapped and tucked into the wicker. It’s not very easy, I weave it tightly. You can simply roll it up.


The beginning is the same as that of a high chair. Add bases to the sides and fly in a simple way.

Here I made the base for the back in an arc. Let’s braid.

Creating a roof

After this they make the roof. Having understood how to make a house from newspaper tubes, and having studied photos of finished projects, you can choose the most suitable solution.

The simplest option is to make a rectangle using the same technique (“rope”), bend it in half and attach it with glue to the 2 triangular ends of the walls of the house.

Another way is to take a sheet of cardboard and cover it with any available material that imitates tiles, for example, wine cork cut into thin plates. You can cover a cardboard base with golden yellow-painted tubes to create a thatched roof.