DIY wooden boat, drawings, diagrams, photos / Siberian hunter

History of origami

Folding of various paper figures began in Japan at the beginning of the 8th century. The word “origami” is translated from Japanese as “folded paper.” At that distant time, paper was very expensive and only churches and monasteries used it.

The real art of origami began with the making of cranes. In 1797, the abbot of the Rokan monastery published the book “How to Fold a Thousand Cranes,” which contained a description of the step-by-step folding of 49 types of cranes from paper. Much credit for the development of this art form in the 20th century belongs to Akira Yoshizawa:

  • He had innate teaching abilities. A simple draftsman Akira, who worked at one of the factories, explained to young people the basics of descriptive geometry, folding paper figures.
  • In 1954, the book “The New Art of Origami” was published.
  • On his initiative, a Center for the study of this art was opened in the capital of Japan, where a real set of rules for working with paper, including all designations, was developed.

Having lived a long life, this wonderful man gave the world of art 50 thousand models unknown before him, and in total he wrote and published 18 books on origami.

This art appeared in Europe in the 16th century. In monasteries, headdresses were made from fabric without the use of threads or needles. The art of origami was preceded by napkins in the homes of wealthy citizens, folded in interesting ways. With the development of industry, paper figures came to the West. The German teacher Friedrich Froebel made a great contribution to the technique of paper folding.

Russian masters and promoters of paper art are Yuri and Ekaterina Shumakov. Psychologists by profession, they argued that folding toys develops the mobility of the fingers of both hands.

They have released a series of teaching aids and diagrams, and with the help of their step-by-step instructions, making a paper boat is very simple.

From the point of view of doctors, this hobby has a positive effect on the child’s psyche, leading it to harmony and balance.

How to make a wooden boat with your own hands

For a long time I wanted to create a post highlighting the main points in making a boat, but it never worked out! Dad gets older every year, but there is still no cheat sheet, although he and I have put together more than one pair of boats. And this year there was a need to expand our fleet, because the children are growing up and boats are required that are more stable and load-bearing for reliable movement.

I myself used to swim to the surface, but with my sons I need to be careful! The time has come to take out the previously stored boards, edge them, plan them, prepare nails, and one weekend we get down to business! (It’s better to use spruce boards, without knots, but you don’t always have what you need)

First of all, Dad sketched out a little drawing with dimensions based on the requirements and previous construction projects

Then they laid out boards for the bottom, drew a contour on them according to the dimensions, cut out the main part with a jigsaw, leaving only the edges, this can be seen in the photographs.

When fitting the boards one to another, we leave gaps in the stern and in the bow, but in the middle we fit them more or less tightly

Next, we prepared crossbars for the bottom from the bars. The crossbars are made in a rounded shape as shown in the photo

When all the parts are prepared, we begin assembling the bottom, first tightly assembling the boards and sewing them with nails in the middle with a cross member, then using a rope and two crowbars we pull together the stern, sew them together with nails, and do the same with the bow

Due to the fact that the crossbars are rounded, and gaps were left between the boards in the bow and stern, when screeding and assembling, the bottom turns out to be a bit of a sphere both across and lengthwise. In the future, this gives the boat stability on the water. It is not necessary to adjust and tighten the bottom boards to microns, small cracks are quite acceptable, this will make it easier to caulk the bottom.

When the bottom is assembled, we line out the edges according to the planned dimensions and markings so that the edges are smooth, otherwise it will not be possible to bend the side boards clearly

Next, we prepare the surfaces for the side boards, chop the frames, bow board, and stern.

The most interesting thing is ahead, you need to bend the sides at the same time on both sides, if bending one by one can warp and the boat will turn out to be skewed. We apply the side board to the bow on one side and sew it on, then do the same on the other side, then one presses it, bending the boards, the second pierces it with nails towards the stern.

The boards were tied together in the same way as the bottom – with a rope. As a result, some kind of shape was drawn, then it’s easier. We bend the second row of side boards in the same way. We don’t hit a lot of nails when stitching because we still have to caulk! Next, we saw off the excess ends of the boards, both the side boards and the bow and stern. Then you adjust the front bow board.

After completing the assembly, you work with a plane, rounding where necessary, leveling it, going through the entire longboat, cutting out the frames beautifully. After making it beautiful, we caulk it, add nails in places, screw the rowlocks, resin the bottom, nail the strips to the bottom, resin them, then paint.

In principle, I tried to take into account all the stages and subtleties in the photograph, so that it would be clear. Two boats have now been put together, one for the opening, the second just recently. The boats were made identically, one was tested, the second was at the stage of completion of work.

If anyone has any questions, please ask, I’ll be sure to clarify! It’s true that questions usually arise when making things yourself, wondering if someone will take it and make a piece of wood. For those who live near the lake, a piece of wood is irreplaceable!

Thank you for your attention!

How to make a paper boat with your own hands

There are probably no parents who are not familiar with the technology of making boats. But perhaps it has faded a little from your memory. Now that you have a preschool or primary school-aged child, it’s time to brush up on this activity. Make this wonderful spring craft with your child.

A paper boat is a great craft. This activity will help develop fine motor skills and is an excellent exercise in spatial thinking.

Among other things, you will receive an entertaining toy. And the baby will be able to play, inviting friends and relatives with him. There are a lot of game options, for example you can arrange a race or an expedition.

They can be made from colored paper, and can also be painted or painted. You can select a whole crew for the ship using small soldiers. If the weather outside is not very good, you can play by letting them swim in the bathtub. And at the dacha you can use a basin for this. In a word, this is an extremely exciting activity.

Recommendations for making a paper boat:

  1. By using single-sided colored paper, you will get a unique toy, since the boat will be partially painted in a certain color.
  2. A sailboat can be made using a regular toothpick, and a sail can be made from fabric, colored cardboard, foil, leaves, colored napkins and much more.
  3. This toy can be made using office paper. And so that the boat does not get too wet while floating, it can be made from a coated magazine sheet.
  4. Dipping a toy into melted wax or paraffin will make it waterproof.
  5. Using a white sheet, you can show your imagination – decorate and paint it in any color.

How to make a boat out of paper

  • 1

    Take a regular A4 sheet of paper and fold it in half.

    This is called “hamburger style” paper folding. Make a neat fold along the sheet of paper.

  • 2

    Unfold a piece of paper and fold it in half vertically.
    After you have first folded the paper in half horizontally, unfold it and fold it in half again, but this time vertically. Once you have done this, unfold the paper and fold it horizontally again.

  • 3

    Fold the top corners.

    Take the top two corners and fold them over until they meet at the center fold.

  • 4

    Fold up the bottom edges of the paper on both sides.
    Take the top half of the bottom edge of the paper and fold it up toward the bottom of the triangle (the folded corners). Turn the paper over and do the same with the bottom. As a result, you will get a paper hat.

  • 5

    Fold the bottom corners inward.
    On one side of the paper, take the corners of the rectangle that extend beyond the boundaries of the triangle. Fold them inward along the edge of the triangle. Also fold the corners of the rectangle on the other side of the paper.

  • 6

    Make a square out of the triangle.
    Open the bottom of the triangle with your fingers. It will begin to take on a square shape. What were once the bottom corners of the triangle will become the bottom corners of the diamond.

  • 7

    Fold the bottom edges up.
    Turn the paper so that the bottom edges of the diamond can be folded up. Fold one corner up, connecting it to the top corner. Turn the paper over and do the same on the other side.

  • 8

    Make a square from the triangle again.
    Just like last time, use your fingers to open the bottom of the new triangle. The bottom corners will meet and become the bottom edge of the square diamond.

  • 9

    Pull the triangles from the side of the square.
    Start at the top of the diamond and gently pull the corners in different directions until the middle of the diamond becomes visible. The edges of the boat can be bent a little more, so the boat will float on the water and will not sink.

  • 10

    Launch the boat.
    Pour water into a small basin and lower the boat into it. If it starts to lean a little, make the edges of the boat a little higher and it won’t sink.

  • How to fold a boat step by step

    1. To make a boat you will need a rectangular sheet of thick paper.
    2. It is better to place the sheet vertically in front of you.
    3. Taking its upper corners, you need to connect them with the opposite lower ones.
    4. Having aligned the upper and lower parts of the sheet, it remains to carefully smooth the fold line.

      Further in the process of work, it will no longer work. This is how we got the blank for work. It is necessary to mark the middle on it.

    5. The workpiece is placed vertically in front of you. Its angles are aligned as in the first case. Having outlined and ironed the additional fold of the workpiece, you need to unfold it.
    6. Now it needs to be placed with the main fold up.
    7. During the preparation process, the stage of marking several guides of the working square was deliberately omitted.

      Slightly lifting the front part of the workpiece above the bottom, it is necessary to form an isosceles triangle by tucking the side elements of the folded sheet into the workpiece until they are aligned at the intended center. As a result, two strips of unused material were formed at the bottom.

    8. The strips must be bent to form a triangle. First, the corners of this strip remaining in free “floating” are bent to the opposite side, repeating the contours of the main triangle. After turning the workpiece over, you need to repeat the operation just performed with the second strip.
    9. The resulting cap needs to be opened and folded so that the side fold lines are central. It should look like a rhombus.
    10. The lower (free) corners are bent upward. For the first one, you need to select a height.

      If the notebook sheet format was chosen as the material, then this corner should be 1 cm below the top of the workpiece. For A-4 paper format, the distance can be selected 1.5-2 cm. The line must be carefully smoothed. The workpiece is turned over; the guideline for bending the second corner is the bottom of the element on the opposite side.

    11. Again you need to move the side and center lines. The result is a rhombus with a “cut off” bottom edge.

    How to assemble a paper boat: step-by-step instructions

    A flat-bottomed boat made from a square sheet of thick paper is made based on the basic “catamaran” shape. The paper preparation process involves drawing out many working lines. But there are no complex elements in this model, so the process of folding the punt begins immediately.

    1. The square sheet is folded in half. The fold line must be securely smoothed; it will serve as a guide for other actions.
    2. The edges of the sheet are folded towards the center line. The side lines are pressed down.
    3. The resulting rectangle needs to be given the appearance of a candy. To do this, the corners must be turned inward. Their sides should be adjacent to the center line at right angles.
    4. Each resulting triangle is the basis for an acute angle. At the top, the thin corners should also be adjacent to the center line. At the end they separate like the wings of an airplane. First, matching corners are formed on one side, only then counter ones are made, because the diverging ends of the sharp triangles are partially overlapped by the counter ones. These elements need to be beautifully formed.
    5. The joints are the tips of the corners, which must be brought to the center line, and the edges pressed tightly.
    6. You need to take the resulting canoe in your hands and bend it in half on the reverse side. The ship needs to be turned inside out. To do this, the very first folded elements are retracted from the center line in different directions.

    A flat-bottomed boat made from a square sheet of thick paper is made based on the basic “catamaran” shape

    Having turned the boat inside out, all that remains is to correct the shape of the last folded elements with your fingers.

    Classic paper boat model

    After training on a simple model, they move on to making a more complex version. The procedure for this is as follows:

    1. Take an A4 sheet, fold it in half (along the long side of the sheet). Unfold with the fold up. Bend the workpiece slightly, marking the middle on the top line. Как сделать кораблик и лодочку из бумаги: детские поделки
    2. Fold the upper left corner towards the middle, with the previously marked middle as a guide. Как сделать кораблик и лодочку из бумаги: детские поделки
    3. A similar action is performed with the right half. Smooth out the folds. Как сделать кораблик и лодочку из бумаги: детские поделки
    4. Fold the resulting rectangle under the triangle upward (along the bottom line of the triangle), and do not touch the lower quadrilateral for now. Как сделать кораблик и лодочку из бумаги: детские поделки
    5. Turn the workpiece over and bend the second rectangle in the same way. Как сделать кораблик и лодочку из бумаги: детские поделки
    6. Secure the sides by bending two corners to the opposite side, as shown in the figure. Как сделать кораблик и лодочку из бумаги: детские поделки
    7. The future paper boat is turned over again and the remaining two corners are fixed.
    8. Open the pocket that has formed inside the model.
    9. “Flatten” the workpiece by connecting its opposite corners.
    10. The free edge of the resulting pocket is turned outward diagonally.
    11. Exactly the same action is performed on the reverse side of the workpiece.
    12. Stretch the free edges to the sides.
    13. The model is ready.

    If desired, it can be colored with pencils, gel pens or felt-tip pens. Test the ship in a basin of water or a nearby puddle.

    A boat made of colored paper

    This most popular summer-themed craft can be created not only using the origami technique. This master class features such a bright sailboat!

    Required materials:

    • colored semi-cardboard in red, yellow and blue;
    • skewer;
    • glue;
    • scissors;
    • ruler;
    • marker;
    • pencil.

    Create the frame of a sailboat. To do this, take blue half-cardboard and cut out two identical strips with dimensions of 18 x 2.5 cm. DIY wooden boat, drawings, diagrams, photos / Siberian hunter

    Using a ruler and pencil, divide each strip into three equal parts. We bend in those places.

    Glue the two parts of the boat base together along the sides.

    Next we will create a small part of the ship’s deck. We use blue half-cardboard again.

    Cut out a small rectangle. We measure 1.5 cm from the sides for gluing.

    Bend along vertical lines and glue the part into the middle of the ship between the bases.

    Now we will prepare a wooden skewer and two pieces of yellow sheet of different lengths to create sails.

    Create small holes in each rectangle. We insert a skewer through them.

    Cut out a small square from a red sheet. Glue it to the deck. We make a small hole along the diameter of the wide part of the skewer. We insert it.

    Now we cut out a beautiful flag from a red sheet that will flutter in the wind. Use a black marker to highlight the contour lines.

    Glue the flag to the highest point of the sailboat.

    Use a black marker to complete the portholes and other important details on the paper boat.

    A wonderful paper boat is ready for sea voyages! On the deck you can place small toys of pirates, sailors and the ship’s captain.

    Making an applique – paper boat

    Another craft option.

    See a detailed master class on paper boat applique here.

    Summer sea crafts: simple flat boat – origami

    Scheme of an ordinary origami paper boat that can be sailed through puddles, streams, rivers, etc. — in the article “Waterproof boat for children made from waste material.”

    And in this article there is a diagram in step-by-step photographs of such a simple flat boat with a sail, which can be used as a separate craft or glued to a cardboard background to make a summer craft on a marine theme: a panel or a postcard with the sea and a boat.

    1. To make this model you will need a square sheet of colored paper.
    2. Fold the square diagonally.
      Как сделать кораблик и лодочку из бумаги: детские поделки
    3. Fold the top corner down towards you.
      Как сделать кораблик и лодочку из бумаги: детские поделки
    4. Turn over to the other side.
      Как сделать кораблик и лодочку из бумаги: детские поделки
    5. In the same way, bend the top corner down towards you.
    6. Fold the right corner up.
      Как сделать кораблик и лодочку из бумаги: детские поделки
    7. Fold up the left corner.
    8. Fold the bottom corner up towards the middle.
    9. Turn over to the other side – summer sea craft – boat – ready!
    • If you bend the bottom corner on the back side of the figure to the side, it will serve as a stand – due to this, the boat will stand stably.

    Materials and tools

    To practice origami with a child, you need to prepare him for this, take the right approach to organizing the workplace and selecting tools. First of all, you need to choose good paper.

    The ideal option would be to purchase a special origami kit, where the paper is already cut into separate pieces. Usually it is white on one side and colored on the other.

    There is also colored paper on both sides, as well as paper with ornaments.

    • Office paper, as it does not slip and holds volume.
    • It is acceptable to use sets of colored paper or cardboard for manual labor.
    • Some models require scissors and glue to make. It is best to take a glue stick or thick PVA glue. It is better not to use the aerosol analogue with children.
    • There is also an adhesive mass on sale, it is most interesting for children: a piece is torn off, a ball is rolled out of it and the part is glued. The mass leaves no traces and, if necessary, you can detach any part of the craft.

    If a boat or other figurine is made of white paper, the product will have to be painted with gold or silver paint. For non-sized paper, you will need scissors to cut a piece of paper to the desired size. Here you should take care of the child’s safety by choosing age-appropriate models.

    If a child does something according to a pattern, he needs to know some symbols. In the methodological literature on working with origami, there are symbols for sketching diagrams.

    They, in the form of lines, arrows and signs, show the entire process of manufacturing the product. In addition, it is useful for a novice origamist to know some techniques.

    They are usually not commented on in books and manuals, so children need to be introduced to them.

    Necessary materials and tools

    Having dealt with all the theoretical issues, we move on to practice. Collecting all the tools and materials and preparing them for work is the final part of the preparation, so this process must be treated with special care.

    Consider the list of tools and instruments that will be needed during assembly:

    • DIY wooden boat, drawings, diagrams, photos / Siberian hunter
      It is best to take wood that has lain for at least a year in a dry place on a flat surface.

      Boards that will serve as the main material.
      It is best to choose pine or spruce. It is perfect for such purposes due to its characteristics. The boards must be free of cracks and falling branches. Many people believe that the board should be completely free of knots, but this is a misconception. They won’t do any damage to the boat if you hold on tightly. You can check this by hitting them with a hammer or even a sledgehammer. A crash test like this immediately gives many people an understanding of the whole situation. In addition, it is best to take wood that has lain for at least a year in a dry place on a flat surface.

    • Polyurethane glue.
    • Nails.
      You will need nails of different lengths, in large quantities. But you need to understand that often they can be replaced with screws.
    • Screws.
      Like nails, they should be of different lengths.
    • Screwdriver and drill.
      Any screwdriver will do, but you need a drill that is not very powerful so that it does not split the wood. You can even use a hand drill. It is not recommended to replace a drill with a hammer drill.
    • Jigsaw.
    • Sandpaper.
    • Roulette.
    • Tow.
    • Water-repellent paint
      (a lot).
    • Brushes for applying paint.
    • Resin.
      It can replace glue, although working with it requires more attention and skill.
    • Syringe
      , for applying glue to hard-to-reach places.
    • Paracord.
      It will be needed to give the sides the required shape. Can be replaced with other dense ropes that can withstand heavy loads.
    • Metal sheets
      (they can serve as an excellent bottom for a boat, and they can also be used to fasten some parts together well).
    • Antiseptic.
      Needed to impregnate wood.
    • Varnish.
      It is advisable to use high-quality yacht varnish.

    This is a basic list of what will be useful during assembly. In addition, other tools may be useful in the process. For example, a hacksaw, a hammer, clamps, etc.

    DIY wooden boat, drawings, diagrams, photos / Siberian hunter

    Deciding on sizes

    One of the most important stages in the planning stage. The size determines the capacity, load capacity and weight. It is very important to maintain the correct dimensions so that the boat is stable on the water.

    Determining sizes is not an easy process, so let’s look at what you need to know and what sizes we are talking about. It’s worth saying right away that the recommended sizes are described here.

    They can be changed at your discretion, but within reason:

    • Length of the entire structure.
      The length can vary from two to four meters. If the vessel is designed for one, then the length should be 1.8 – 2.5 meters. Two people – approximately 3 meters. Three people – 3.5 – 4 meters. A boat 3-4 meters long can easily support up to 5-6 people; the issue here is more about comfort.
    • Width.
      Also one of the main criteria. Average widths are 1 – 1.5 meters. The greater the width, the more stable it is wonderful. On the other hand, the greater the width, the less maneuverability. It is necessary to find a middle ground. It is different for everyone depending on the person’s body, the load that will be transported, as well as the length of the entire structure.
    • Side height.
      The average and recommended side height is 50 centimeters. Again, you can make it either higher or lower, depending on your desire.

    It is based on these dimensions that it will be necessary to make all the details in the future. It is difficult to determine these dimensions by eye, so it is best to make a drawing for clarity.

    Moving on to the drawings, we must immediately say that it is not necessary to have a talent for drawing. At the moment, a drawing can be made without having such skills online on the Internet. You can make a three-dimensional model that will meet all the requirements and desires.

    In the drawing, in addition to the main dimensions, you must immediately determine the dimensions of other, smaller, but no less important parts. It is best to make drawings for them separately, so that you do not have to adjust them in the future.

    DIY wooden boat, drawings, diagrams, photos / Siberian hunter

    Manufacturing Features

    There are really a lot of features, so let’s look at them in detail:

    1. Working with wood.
      The first and main feature is the ability to work with wooden structures and wood in particular. You need to understand which boards are best to choose, how to bend them correctly, what loads a particular material can withstand. Before starting work, it is best to prepare and read books on woodworking. They are very easy to find and are freely available on the Internet.
    2. Selection of materials for assembly.
      In addition to wood, you must immediately decide on other materials that will help hold the boat together and protect it from leaks. They must be suitable for the material that has been chosen and interact well with it.
    3. Assembly location.
      Manufacturing will definitely require a lot of space and time. For professionals, manufacturing and assembly can take from 4 to 10 days, depending on the complexity. A beginner will need several times more time. This is why it is important to choose a dry and comfortable place.
    4. Tools.
      To facilitate and speed up the process, you will need a number of tools (which we will look at later). In addition, it is advisable to have an extra pair of hands during some stages of assembly.

    These are the main features you need to know, but as you progress, you will likely encounter others.

    DIY wooden boat, drawings, diagrams, photos / Siberian hunter

    Varieties of paper boats

    Children like ship models that are different from each other. Therefore, to create their own flotilla, they make steamships, boats, and pleasure boats. Using the following instructions you can quickly and easily make a steamboat:

    • cut out a square from a sheet of A4 format. To do this, the sheet is bent diagonally. A square is formed, and the excess rectangle is cut off;
    • the square already has one diagonal, but a second one is needed. To do this, connect the opposite corners of the square;
    • one of the corners is bent towards the center of the square;
    • do the same with other angles;
    • turn the workpiece over and bend all four corners to the center;
    • turn the model over again, bend the corners again to the middle of the square;
    • once again turn the future steamer over, open one of the pockets;
    • do the same with the opposite pocket;
    • stretch the unopened corners and get a motor ship.

    The main advantage of the resulting model is its stability on water.

    Older children who are familiar with symbols can design a boat. Let’s consider the sequence of actions to create it:

    1. Prepare a square from a standard sheet of paper. Bend it in half once (you get a rectangle) and immediately in half again. Carefully smooth out the folds. Unfold the square.
    2. Fold the top and bottom lines to the middle of the square. Get a rectangle.
    3. Without changing the position of the workpiece, 4 corners are bent to its middle.
    4. The two upper and two lower corners are turned towards the center. Iron the folds.
    5. The upper and lower corners of the diamond are brought to the center of the workpiece.
    6. Turn the model inside out.
    7. Another flotilla unit is ready.

    A paper boat can become not only a toy, but also an interior item. The sailboat model shown below is suitable for decorating a boy’s room. It is made quickly and is suitable for children of different ages. Algorithm for creating a sailboat:

    • make a square. To do this, bend one of the corners to the opposite side of the sheet and smooth out the fold. Draw the border of the future square and cut off the excess along it.
    • determine the second diagonal on the workpiece. To do this, connect the corners located opposite each other;
    • three corners are folded to the center of the square. It will look like an envelope;
    • bend the lower triangle, directing its apex downwards. At the same time, they retreat from the bottom edge of the envelope by 1 cm;
    • the workpiece is folded in half, bending the central diagonal in the opposite direction;
    • direct the center inward. This is the most difficult point of the scheme. Requires skill and patience;
    • tuck the lower edge of the sailboat, thus forming a support for it;
    • model completed.

    Sailboats are made in different sizes and colors, placed on a tray, cabinet, or placed on shelves. The marine interior is ready.

    More complex ship designs are selected for schoolchildren. First-graders cope well with the algorithm for completing a motor ship.

    Older children will be able to design a catamaran or motor boat.

    The process of creating ships and other paper figures is not possible without the participation of adults. In the early stages of mastering the origami technique, parents and teachers must support their children, help them master new elements, and encourage them. For interested guys, you should select more complex patterns in order to improve your technique and enjoy creating a new model.

    Recommendations for conducting classes

    Of course, it is most convenient for a child to do appliqué at his children’s table, in clothes without long sleeves or with the sleeves rolled up. Classes should be in the nature of a game and last from 5 to 10 minutes.

    When inviting your child to make, say, a tumbler for the first time, show him what figures he needs to take for this and how to fold them. Leave your picture in front of your child as a reference while he creates his own.

    Despite the fact that children love everything new, they also love repetition. Therefore, during classes you should not avoid them, even if at first glance the child has learned how this or that image is formed. You can, for example, put together a house in several lessons in a row or return to this image after some time, making some improvements – changing its size, shape, color, or adding details.

    During classes, comment on your actions and the actions of your child so that the baby learns the names of shapes and names of colors.

    If you made a tumbler, a bear cub, etc., then the eyes and mouth can be made from colored threads rolled into a ball.

    Before starting the lesson, place all the figures in front of the baby and give him the opportunity to get to know and play with them.

    When engaged in geometric design, the child must move from simple to complex.

    Among the tasks given below, there are some that are given somewhat ahead of time – they are given here as an example of how tasks can become more complicated – and, most likely, the child will not be able to do until a certain point. In this case, offer these and similar tasks later.

    ***

    It is better to start practicing geometric appliqué with images made up of homogeneous shapes: a Christmas tree – from triangles, simple beads – from circles, or a simple path from rectangles.

    Drawings and photos

    DIY wooden boat, drawings, diagrams, photos / Siberian hunter

    Reviews from parents

    We live by the sea, almost every day we go to see him with our son and daughter, we just stand on the shore and look at the ships going by, we dream, we talk. One day I had a desire to make paper boats myself.

    Let’s go ashore, listen to the sound of the surf, cook lunch, eat, make two boats. Alya paints them with paints, and Anton makes sailboats. Then we all attach the sails together and go to launch. The guys are happy and I feel good.

    This is roughly how our day goes.

    My thirteen-year-old son still loves to play with paper boats; he fell in love with them since childhood when he was at home with his grandmother. My mother spent her entire life in school (she was a primary school teacher) and she and her grandson were always sculpting, cutting, folding something. She taught him how to work with paper.

    DIY thread crafts: interesting and affordable options

    He is seriously interested in this, he even writes his own blog on origami, they write to him a lot, asking for advice. Recently I showed you how to make a military cruiser. I’m very glad that he is doing something serious and not sitting on the phone all day like his classmates. Thus, even simple paper boats can affect a person’s fate.

    I think that it is very useful to teach your children how to make something with their own hands in order to distract them from the phone, in which they sometimes spend the whole day. I work at a school and see how everyone has fallen into this addiction, even teachers.

    When our son was born, my husband and I immediately decided that we would raise him differently. Now he is three years old. He has a phone: he goes to kindergarten, he needs to keep in touch. But at home we try to read more with him, we put together a construction set.

    And lately we have become interested in boats. This is his favorite game now. We already have a whole collection on our shelf. He tries to do everything himself, then paints them. And recently we wrote a fairy tale about an airship with him, made decorations, and showed him in kindergarten. Everyone liked it.

    Recently, my son’s friends (and they are already 12 years old) surprised me when they saw my daughter’s origami-style work. They were simply amazed when they looked at our paper boats.

    That’s right, today’s kids are used to gadgets and don’t notice anything else around them.

    I remember how my three-year-old daughter rejoiced when the little white boats she made with her hands floated in the bathtub, she simply jumped with delight.

    She’s already six now, but she still hasn’t lost interest in boats: according to tradition, we launch our entire “fleet” every spring. All the kids come running, admiring such beauty. We improve them every year and come up with something new.

    I advise parents to pay attention to paper crafts; you will see for yourself how much pleasure you will bring to your child. And it’s not difficult to make a paper boat out of paper, you just need to buy a book on origami, there are many diagrams there.