DIY paper crackers

Clapperboard is a fun attribute of any party. It gives bright emotions not only to children, but also to adults. In this article we will tell you how to quickly make several types of firecrackers from scrap materials.

как сделать крекеры из бумаги

Reusable safety cracker

To make crackers we need:

  • packaging paper;
  • toilet paper rolls;
  • balloons;
  • filler – sequins, tinsel, Christmas tree, confetti;
  • scissors, glue or double-sided tape.

как взять хлопушку с бумагой

making a double is quite simple; you can involve a child or guests in the creative process.

Step 1. Tie the base of the ball into a knot, cut off the top, and pull it over the sleeve. For a stronger grip, you can use tape.

Step 2. Decorate our cracker with decorative paper: you can use glue or double-sided tape. We cover the sleeve with paper; you can decorate it with various glue beads and stickers.

Step 3. Fill the sleeve with a “filling” of finely chopped rain, glitter and confetti. You can also use finely chopped sheets of a magazine or newspaper as a filler.

To make the firecracker work, point the open end up, pull it back and release the tip of the ball. Here’s how to quickly make a reusable cracker that will create a festive mood in any situation.

сделать крекер из бумаги

Firecracker – glitter rocket

Another version of a cracker that is easy to make with your own hands. We need:

  • paper for decoration – corrugated, packaging;
  • sleeve;
  • “Filling” for the cracker – sequins, confetti;
  • Scissors, stapler, glue, lace.

оригами взломщик бумаги

Step 1. Cut a circle from thin wrapping paper equal to the diameter of the sleeve. Make a hole and insert a lace. We tie a knot on the cord on the inside.

Step 2. Glue the circle with the cord to the base of the sleeve. The best way to do this is with a glue gun.

Step 3. Decorate the cracker: make “grass” from corrugated cardboard and glue our rocket, make a triangular cap on the base.

Step 4: Fill the grommet halfway with glitter and small confetti. Glue the cap to the base.

Our cracker is ready. To activate it, you need to pull the rope at an angle, and the contents of the firecracker will fly in different directions.

как сделать бумажный крекер

Firecracker – candy

This original hacker will delight you and your friends. And doing this is as simple as peeling pears. We need:

  • decorative paper;
  • thin cardboard or thick paper;
  • “Filling” for crackers: glitter, confetti, New Year’s rain;
  • scissors, double-sided tape.

Step 1. Cut a sheet of cardboard to the desired size and roll it into a tube. Secure with tape. We make a cut in the middle of the pipe to make it easier to break the cracker.

Step 2. Decorate our cracker: wrap it in one layer of paper. Tie one end of the tube with tape. Pour glitter, crushed rain, and confetti into the cracker through the open edge. We tie the wrapping paper on the other side with masking tape.

Our cracker is ready. To “explode” you need to hold it horizontally and punch it into the recess.

бумажные крекеры

Origami firecracker

Origami is the ancient Chinese art of creating various paper figures without the use of scissors or glue. All we need is a rectangular piece of paper.

Step 1. Fold our sheet horizontally on both sides. We straighten the part – we still have clear contours down to the folds.

Step 2: Press the edges of the paper into the center fold on all sides. We will have 4 set aside ribs.

Step 3. Fold the piece in half so that our folds are inside and again in half along the fold line. The result is a piece that resembles half a house.

Step 4. Open each half of the house: take out a pocket and “close” this pocket from the center to the edge. We do the same with the second side. The result is an empty space that resembles a triangle-shaped book.

Take a step. Turn the cracker over with the pockets facing down. We take it from the bottom corner and with a confident movement of the hand we clean off the cracker. Cotton. The clapper is open, but you can store it carefully and reuse it.

Cracker – a candy made using the origami technique

Beautiful original crackers that you can make with your baby. We will need good medium weight scrapbooking paper.

Step 1. Fold our sheet horizontally to mark the middle. We straighten the piece. Fold the sheet horizontally on each side in the center. We straighten the piece. We have distinct folds that divide the sheet into 4 segments.

Step 2: Fold the bottom over the top fold. Fold the top of the paper from one end to the other. We open the piece and do the same with the other side of the sheet. We lay out the piece – our sheet is divided into eight equal segments.

Step 3: Fold one corner of the paper diagonally and make a mark with a pencil.

Step 4. Position the sheet vertically so that the bottom of the sheet relative to the mark is larger than the top. Fold the bottom over the mark twice. We straighten the sheet. At the first fold, fold the bottom edge of the sheet.

Step 5: Fold the top of the paper over the mark. We turn the sheet over so that most of the fold is to the left.

Step 6. Make a diagonal fold at the top of the paper between the folds. Draw a diagonal curve on each of the eight segments.

Step 7. Fold our blank as follows: insert the bottom part of the sheet into the top. We have a closed tunnel of six segments.

Step 8. Then insert the bushings on both sides and slide them in different directions. Diagonal folds should create a nice, even curl. We take out the bushings.

Step 9. Do the same with the second piece and insert them into each other. The center can be filled with confetti or small presentations.

как сделать взломщик из бумаги своими руками

Making and using crackers is a creative and fun process that will lift your spirits. Involve children in the creation process and they will have great fun not only from throwing the confetti, but also from creating the craft itself.

An original solution would be to use a cracker to put not confetti, but a small surprise for a child or guests: a small bar of chocolate, candy, a note with a wish.